Connecting vonage vt2442

Hi not sure if this problem is still there, with that device u may have to try a mac clone. have everything set up properly, and on the computer connected to the vonage go to the cmd prompt, enter 'getmac' and it will give u a mac address or try ipconfig/all and write down the mac address fro example it will say 00:12:3e:8d:ca:01 so write that down, then open an internet explorer page and empty everything from the address bar and type in 192.168.15.1, then a screen will pop up asking for a username and password., this is the settings interface page. router is both. then go to advanced set up, then ethernet options then u will see something about a mac clone. selct that the enter in the mac id u wrote down earlier than apply, now restart the whole system modem and vonage, then turn modem first wait for lights than vonage and wait for vonages power lights be solid green. then it should work.
it may not work in broadband is inactive or not enough speed to work sufficently. try that first :)