Vector Sport Spot 1,000,000 candle power spotlight
What is the voltage of the power cord that I should use to regenerate
the battery to my 1000000power flashlight? The specifications on
the light are "Vector Sport
Spot 1,000,000 Candle power spotlight" VEC127Y
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Having a current monitor (Kill A Watt P3), comes in handy to check to see if the wall transformer / charger is drawing any current. That would determine if the charger was working to some degree. The best way is to measure the voltage coming out of the charger itself. It should be low voltage. I would use an digital auto multimeter to check the voltage. The transformer should have written on it somewhere the type of voltage (DC-direct current/AC-alternate current). Be careful not to shorted the end connector as I could damage it.
Usually these will take two 6V 4ah sealed batteries ( about $12.00 for the pair shipped - available from a number of Ebay sellers). Pop off the back cover - verify the type batteries then replace them hooking the red and black wires terminals the way they were originally.
it's telling you the battery is fully charged so suspect that either the battery is dead or the bulb is burnt out. Get a test meter and test for voltage at the battery. If yes, then the bulb is burnt. If no voltage then obviously the battery is bad
Black and Decker's website has downloadable OEM manual which gives part numbers to replace power adapter, also sold at Radio Shacks or RV places like Boat and RV which can be Googled. Best Buy also sells AC/DC relacement multi voltage universal adapters which are about $12.00 - $20.00. Hope this helps ! Matthew
Solution one: Make sure the electrical outlet works
Unplug the power cord from the electrical outlet.
Plug another appliance into the electrical outlet to make sure the outlet works.
If the electrical outlet does not work
, plug the product into another outlet that does work.
If the electrical outlet works, but the product still does not turn on
, continue to the next step.
Solution two: Make sure the power supply is compatible with the HP product
sure the voltage and amperage specifications printed on the power
supply match the voltage and amperage specifications printed on the HP
Voltage and amperage specifications printed on the power supplyVoltage and amperage requirements printed on the HP product
this example, the voltage (+32 V) and the amperage (2000 mA) from the
power supply is compatible with the voltage and amperage specified on
the HP product.
the voltage and amperage specifications between the product and the
power supply are compatible, make sure the connector on the power cord
is the same shape and color as the connector on the HP product.
Do not force a power cord into an HP product that is incompatible with the HP product (different shape or size).
If the power cord is not compatible
with the product, replace the power cord with a compatible cord. To buy a compatible cord, right-click the following link,
How to Buy HP
, and then click Open in New Window
If the power cord is compatible
with the product, but the products still does not turn on, continue to the next step.
Solution three: Reset the power module and test the powerStep one: Reset the power module
power module has a safety feature inside that protects the product
during a power surge. If you experienced a recent power surge, the power
module might need to be reset. Use the following steps to reset the
Unplug the power supply from the rear of the product.
Unplug the power cord from the electrical outlet, power strip, or surge protector.
If the product uses a power module with a detachable power cord, disconnect the cord from the power module.
Wait 15 seconds.
Reconnect the power cord to the power module.
Plug the power cord back into the electrical outlet. Do not use a power strip or surge protector.
Check to see if the power module has an LED.
If the power module does not have an LED, continue to the next step.
If the power module has an LED, check to see if the LED lights up.
the LED does not light up, contact HP to replace the power module. To
buy a compatible power module, right-click the following link,
How to Buy HP
, and then click Open in New Window
If the LED lights up, continue to the next step.
Step two: Test the power on the All-in-One
Follow these steps to test the power on the product.
Reconnect the power supply to the rear of the product.
Press and quickly release the Power button (
) to start a Power On/Off cycle. Do not hold the button down.
Figure 1: Press and quickly release the Power button
you press and hold the Power button too long, the product might turn on
and then off without restarting. If this happens, press and quickly
release the Power button (
If these steps resolved the issue
, there is no need to continue troubleshooting.
If the issue persists
, see the next step.
Solution four: Test the power with a compatible power cord from a different product
If you have another available power cord that is compatible with your product, use the alternate cord to repeat the steps in Solution three: Reset the power module and test the power
If the product turns on
with the alternate power cord, the original power cord caused the
issue. Contact HP to replace the power cord. Right-click the following
How to Buy HP
, to buy a compatible power cord.
If the product does not turn on
with the alternate power cord, continue to the next step.
Solution five: Service the HP productIf you have completed all the steps listed above and are still experiencing a problem, service t
In March, 2006, Black & Decker purchased Vector Products, Inc.
Since the acquisition, Black & Decker has assumed the manufacturing
of all Vector products. For customer service and warranty information
for Vector products, please contact Black & Decker Customer Service.
Or you may find one here: http://www.batterywholesale.com/battery-store/SLA-batteries/