I have the disk but it won't work. How do I get a download so webcam will work. I have had this for 3 years or more and never been able to use it.

1st You download Webcam Driver.
Updates won't load on Samsung DP7003ab
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

1st You download Webcam Driver.
Earthlink IBM PC camera won't turn on
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

You'll need to get the driver for this webcam, and make sure that it is made for your operating system (windows 7 32 bit vs. windows 7 64 bit for instance). Older webcams may not have 64 bit drivers, for instance, and won't work on later systems.

Search on bing.com or google.com for vg-0050 and there should be sites that offer free drivers for download. Good luck on this.

1st You download Webcam Driver.
I have A4tech model PKS-732K.
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

1st You download Webcam Driver.
vf-0040 webcam won't install
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

1st You download Webcam Driver.
webcam installed
After this install the Webcam driver in the system.
Installation of Webcam Driver
Go to the control panel
Click on the System Icon
Click on the Hardware Tab
Click on the Device Manager s
Select the Unknown Device or printer device where yellow Question Marks sign on it.
Right click on it and uninstall it.
After this go to the top of the device manager and click on scan for hardware changes.
Driver installation Wizard start.
Brows Your Driver from the Hard Disk and click on next.
Driver will be install.

• You can go to the brand's support page on their website, search your model, and look for it's "drivers". Thats what you need to run it. Once you download and install that, your webcam will work perfectly.
• Please reply if you have any more questions. Good Luck! Please give 4 thumbs up if I helped, I am two votes away to becoming an expert!

Hi there,
You might want to give Ecamm's iUSBCam software a try. It allows many normally unsupported USB webcams to work with the Mac. You can download a free trial of it here: http://www.ecamm.com/mac/iusbcam/index.html
It looks like most Logitech webcams are supported. You can view a list of known working webcams here: http://www.ecamm.com/mac/iusbcam/configs.html#known_configs.
Unfortunately, the iUSBCam software isn't compatible with Mac OS X 10.6 (Snow Leopard). However, if you are using an older version of OS X, you should give the program a try.
Let me know if you have any other questions!
Sincerely, Ben

Here's the webcam software/drivers download:
http://www.logitech.com/en-us/435/6333?section=downloads&WT.ac=sc'downloads''dd
Elle

Disconnect webcam
Uninstall any webcam software
Restart your computer
Download your software from here

http://www.pcgearhead.com/cams.html