GE Adora QuietPower II Replacement Rack Wheels?

You can buy new retainer clips and replacement wheels at any kenmore repair shop.

Replacing Adjuster Wheels on a Kitchenaid Dishwasher ...

? 2:50
https://www.youtube.com/watch?v=ClCHpDL--Gw
Jan 26, 2014 - Uploaded by natifamily
Replacing Adjuster Wheels on a Kitchenaid Dishwasher. natifamily ... Dishwasher Top Upper Rack Adjuster ...

Whirlpool, Kenmore, KitchenAid - Dishwasher Replacement ...

You just need the wheels. I have bought the upper rack wheels before, now I need the lowers. I have found a site selling them at 10.00 each. I am going to keep looking, I think I can do better, considering I need 4. I might just buy a new washer if I have to spend 40.00 plus shipping! I will post back if I find a better deal.

check to see if the arms are spinning properly

the clips come with new wheels, they should cost about $4 for four, I would replace all wheels on the lower rack

No, the wheels must turn, and the glue will eventually degrade in the dishwasher. You will have to find the appropriate clip and reinstall to make it right again.

We have just solved the problem with our wheels falling off! For .75 cents a wheel we purchased new wheel "clips". The connect straight into the wheel instead of "rotating" on. Big differnence and so easy to change out! 5 minutes and the problem is gone. The item number is WD12X10277 and it is a GE product. Hope this helps!

Hi Tom,
Can you confirm that you are talking about the LG 5811 dishwasher? Thanks!

I finally found a solution after 2 years! Appliancezone.com has wheels and studs to fix problem. WD12x10136 and wd12x10277. About $17.00 and rack is rolling perfectly. GE wanted 200 for an entire rack, no thank you!

This one is a known issue and an easy fix. Use a tie wrap to securely tie the water tube for the middle spray to the upper basket. That's it. Believe it or not, it's that simple. You may want to secure it at the front and the back. To test this you can use the tie wraps used to closed the plastic grocery or bread bags. If this solves the problem you can buy a bag of nylon tie wraps from any hardware store. I had a similar problem with another GE model with a similar problem. The dishwahser used to make a horrible grinding noise during the wash cycle. One I secured the middle sprayer arm the grinding noise went away.