Question about Cisco SPA525G

Open Question

My office just installed the CISCO UC320 with the SPA525G IP iphone system. I have no idea why the SPA525G keeps on freeze and the first red light turn on after a while. Once the red light turns on, the phone cannot work. we have to wait for 5-10mins then the light turn off. Any advice? Daniel

Posted by daniel_lcf on

Ad

5 Related Answers

Anonymous

SOURCE: Ethernet Disconnected message in POE 7941G IP Phones

the first problem will be to check or replace the cable that you use to connect the phone or check the jack that you use

Posted on Jul 12, 2007

Ad

Anonymous

  • 1 Answer

SOURCE: CISCO 7912 Ip Phone,Red lights are continuously on.

I have seen this problem when there is no Voicemail, all old Voicemails deleted.

Posted on Jun 27, 2009

Ad

Anonymous

  • 1 Answer

SOURCE: Cisco ip phone 7940 does not ring for incoming calls.

It sounds like you have enabled Do No Disturb accidently. This can be turned on and off by pressing the DND softkey button along the bottom of the LCD display. You might need to press the 'more' softkey to display all options.

Posted on Sep 24, 2009

Anonymous

  • 1 Answer

SOURCE: 7910 IP Phone

you stupid ****! it needs a voice vlan

Posted on Jan 13, 2010

Anonymous

  • 121 Answers

SOURCE: CISCO IP PHONE 7941 -add background images (user preferences,

See Cisco's user guide regarding template modification and customization at http://www.ciscosystems.am/en/US/docs/voice_ip_comm/cuipph/7960g_7940g/7_0/sip/english/administration/guide/7960usrS.pdf

Posted on Feb 19, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cisco 861 behind Wimax Router from ISP


> WAN IP: 44.55.66.777
> ISP Router LAN IP: 111.222.333.174
> Cisco Router WAN IP: 111.222.333.175

Really? Each "octet" must be a value between 0 and 255, inclusive. A value such as '777' is not valid

Aug 27, 2012 | Cisco 861 Router

1 Answer

My red light wont go out on cisco 7960 phone, even when i have no messages


get a dial tone and dial 7091.

do the same with 7090 to turn the message light on.

May 08, 2012 | Cisco 7940 IP Phone

1 Answer

I have added cisco 7916 expansion module to 7965 cisco phone.Now when i started the phone,phone works but expansion module screen shows cisco logo and lights continuously flash.


I know it may be late (definitely late), but have you defined in the CallManager, that your phone has a "side card"? If CallManager does not know that it has to push an additional firmware to a particular phone, it will not work.

Good luck,

Mike ' CCNP, CCVP, CCSP, CCDP, MCSE, etc.
Headset Adapter Co.
Headset Adapters for office phone system

Mar 21, 2011 | Cisco Systems - Unified IP Phone...

1 Answer

How can I clear / reset a Cisco IP Phone 7910


How to set a Cisco IP phone to factory default Reset configuration of Cisco IP Phone (7910, 1911, 7940, 7941, 7960, 7961)

To set the Cisco IP phone to factory default completes the following steps: should be completed:

For 7940, 7941, 7960, 7961 phones:

1. Power up the phone (unplug power cable and plug in again and hold the # key.
2. Release # when lights start flashing.
3. Press 123456789*0#.
4. Press 1 to keep network configuration or 2 to lose the network configuration.

For 7906G and 7911G phones:
1. Power up the phone (unplug power cable and plug in again and hold the # key.
2. Release # when MWI starts flashing.
3. Press 3491672850*#.

Oct 28, 2010 | Cisco 7910 IP Phone

3 Answers

New cisco asa 5510 setup


connect your laptop to the asa5510 using a cross over cable

Oct 07, 2009 | Cisco ASA 5510 Firewall

1 Answer

Iphone is not browsing internet through the Cisco AP 1200 but its associated to the AP


check your setting either static IP or DHCP.

find out what is gateway and ping it.

Jul 10, 2009 | Cisco IOS

2 Answers

CISCO 7912 Ip Phone,Red lights are continuously on.


Well, in most Cisco VoIP phones those lights are used to tell you if you have a voicemail. Have you checked your vm and cleared any new ones? This might be your issue ;)

Oct 14, 2008 | Cisco 7912G IP Phone

Not finding what you are looking for?

Open Questions:

Cisco SPA525G Logo

Related Topics:

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cisco Computers & Internet Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Mike

Level 3 Expert

4372 Answers

Resolution IT Dubai
Resolution IT Dubai

Level 3 Expert

541 Answers

Are you a Cisco Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...