Despite cleaning and also running a cleaning fluid through a wash, my machine is not taking my fabric conditioner from the tray - can you advise?

SOURCE: Fabric conditioner drawer

Try cleaning inside the the machine where the soap dispenser drawer fits into. Sometimes this builds up with lots of soap and fabric conditioner residue and stops the conditioner from going through.
Take the drawer back out and look inside where it goes to see if there is a build up of soap etc...
hope this helps

peter gittos

• 247 Answers
• Posted on Nov 17, 2008

SOURCE: The fabric softner is not going into my washing machine

hi there just try washing the complete soap drawer again in boiling water leave in there for 10minutes to let the hot water work into the gaps and make sure u take all the holders out of the drawer u sometimes have to use a tooth brush to get into the small holes at the bottom of the little funnel what your softener holder goes over also get a small flat blade screwdriver and clean inside that funnel if thats not clean it will stop softener from going away if this doesnt work still then when your softener is supposed to be taken thru the programme make sure the washer opens the valve for the water to go into the fabric softener holder if it doesnt then the solenoid will need replacing as this could be faulty. LET ME KNOWHOW U GET ON PLEASE PETER

SOURCE: Fabric conditioner not going

Check the solenoid belongs to that tray.It may struck.

SOURCE: fabric conditioner drawer not emptying

take drawer out to clean. take it apart and clean top bottom back and front, sounds like theres a blockage stopping the conditioner from syphoning out'

SOURCE: washing machine will not draw fabric conditioner

cleared inlet holes with thin wire