- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you transfer the picture to your computer and you get a black image then your "lens" is faulty - actually a cmos based receiver.
If the photo is ok - then the back LCD screen is at fault.
Either way, it needs fixed and if under guarantee contact the manufacturer and ask for a replacement, or take it back to the store you got it from.
Or if out of warranty you will need to buy a new one I am afraid. If you have some technical skills you could look on eBay for another broken one of the same model as yours and put the two together to get a working camera.
first check the iris of the camera if it is
opening,you will see this when you look inside the lens of the camera
when you turn on and off the switch at camera mode if the iris is
opening....if the iris is ok the second problem may occurs of your
camera is the ccd image sensor....
Use the audio-visual cable that came with your camera and connect your camera to your TV. Now turn-on your camera and switch to "view mode", e.g., to see a already taken picture on your LCD. You will not see anything on your LCD but may see an image on your TV, even if the image is "F18".
I used the above trick to clear an F18 error on an A75. Right now I am trying to get the camera to focus properly, but somehow the above cleared the F18 error.
If the above does not work, try connecting your camera to your computer's USB port using the other cable that came with the camera. Your camera will want to be on, and in the "view mode". I have read that this trick can reset an F18 error.
Good luck. At least it costs zero to try these two tips.
The problem you are experiencing is due to the shutter being stuck closed. Normally the shutter is kept open while you compose the image, and then when you push the button it closes and the CCD records what it was seeing at that moment. When the shutter is stuck the image is blocked from reaching the CCD at all times so you can see nothing. Unfortunately the shutter is a tiny delicate component buried deep within the lens assembly and is not accessible without complete disassembly. I would suggest finding a repair center to ship the camera to, or replacing the camera. I would definitely not _gently_ tap the camera on a hard surface to possibly dislodge a slightly stuck shutter blade. This could easily cause further damage to the camera. However, you are not me. ;)
Advance Camera Repair