I have a Panasonic KX-P2130 printer that doesn't print. After turning on power, all 5 status lights stay blinking. What does this mean? Thanks!

problem is not with your ribbon cartridge. the problem is in your printer's heater. check your printer heater

the print job was cancelled. so close the computer & printer wait 3 seconds and put it on then make sure there is no jobs to print by going to control panel, then printers

sounds like a paper jam. make sure no objects are jamming it. then unplug it for 5 minutes. when you power up if it still says paper jam, spray some BLOW OFF spray. That should clear any objects.

Hi
Check if the ribbon is seating correctly, the Avaya PBX does not have a driver for this that is correct also some printers have a "draft"setting make sure this is off as the printer will only go once over the print in draft

Parts not available...you may try making one yourself.

need motherboard manual for e Machine vc37gv motherboard

I found this at the bottom of the page at this Panasonic Website: http://panasonic.net/pcc/products/printer/windows_compliance/windows_xp_sp2.html

Ron

• Regarding the following printers, Printer Drivers are included in Windows XP CD-ROM as standard

Category Model Monochrome Laser Printer KX-P4410, KX-P4420, KX-P4430, KX-P4440, KX-P4450, KX-P4410i, KX-P4451, KX-P4455, KX-P5400, KX-P5410, KX-P6500(PCL) Dot Matrix Printer KX-P1081, KX-P1121, KX-P1123, KX-P1124, KX-P1124i, KX-P1150, KX-P1170, KX-P1180, KX-P1624, KX-P1695, KX-P2023, KX-P2123, KX-P2124, KX-P2130, KX-P2180, KX-P2624, KX-P3123, KX-P3624

hai
apply some oil to the rod . keep the head postion in the last. Try to print with out the ribbon catriage

thank u

the emulation is diferent

Sevearl problems for this model will give this result. Unit not cost effective to repair. Need to know more on which panel lights blink.