When taking a flash picture. Nothing is showing up in the display/monitor. Everything else (menus) seem to light up and I can few previously taken pictures. I tried to use the timer and after that all the images are black.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Your camera is working exactly as SLRs have worked for the first half-century since their invention. You frame the picture through the viewfinder then take the shot. The display is for menu settings and reviewing pictures after they've been taken. Newer DSLRs will let you use the display for picture-taking (and take videos) but the A200 belongs to the previous generation.
the image in the LCD monitor will darken in strong sunlight or bright light. This is normal occurrrence in device CCDs and does not contitute a malfunction. This image will not be recoded when shooting still photos, but it will be recorded wihen shooting movies.Read you owner manual and adjust the MENU, according with your o. manual.Otherwise you must go the repair shop God bless you
Which is it? The LCD will not show anything, or it will show previously taken pictures? Does it show menus when you press the MENU button? The D80's LCD will not show pictures before you take them. The LCD is for menus, shooting information, and reviewing pictures already taken. You must use the viewfinder for composing your pictures. The LiveView capability which lets you use the LCD for composing is a recent development in DSLRs. Nikon introduced it to their product line with the D3 and D300, released years after the D80.
its actually probably the display. there is 3 different displays. 1. shows picture with icons 2. shows just the picture and 3. is a solid black screen. just hit the display button to cycle through until your desired display is present
It sounds like you have a monitor with a common problem. After a few years some LCD monitors
will blow a power supply. The problem is caused by parts called
capacitors overheating in the confined space of the monitor. If you are
good at electronics repair/soldering you can usually fix the problem. Check out a few pictures on my web site www.ccl-la.com/badcaps.htm You can take the back cover off your monitor and look for the bad parts,replace any that look like the pictures and your monitor should work
fine. The capacitors do need to be installed with the correct + and -
connections, note the stripe on the old one and insert the new one the
same way. If you don't want to try the repair yourself we offer a repair service for $35 plus shipping.
I hope this helps, if so please rate my solution.
Buddy Corporate Computer www.ccl-la.com Over 21 years of computer and printer support/repair
If you mean you see no picture on the lcd monitor before you take the picture and see it only after you have taken it than this is normal with digital SLRs.
But if you mean you see nothing on the lcd monitor after you have taken a picture ( no playback ) then either the shutter is not working , or the CMOS sensor is not working or the camera is not communicating with CF card.