Question about JVC Arsenal KD-S6250 CD Player
There is a varety of causes of ejection of a CD in any player. If the ejection is immediate it may be:- Incorrect length fixing screws fouling mechanism. Faulty eject button Fauly mechanism position sensor/switch Misaligned mechanism Causes of ejection after the disc spins up:- Disc upside-down Incorrect format i.e MP3 data disc in standard CD player Incompatible CD-R type Badly scratched disc Warped disc Player out of calibration Hope this helps
Posted on Sep 21, 2007
Sorry to see that my solution was 'not helpful' which indicates that I have wasted your time somehow.
There is another possibility, the laser lens could be dirty?
Please rate me 'thanks for trying' or better, and comment again with more information if this is not the solution you wanted. I might not have understood your problem properly.
×
New CDs may have some rough spots around the inner and outer edges. If such a CD is used, this unit may reject the CD. To remove these rough spots, rub the edges with a pencil or ball-point pen, etc.
Posted on Nov 21, 2005
Unplug the multi-pronged wire behind the unit and see if it will eject.
Posted on Jul 12, 2008
I have the problem where my thingy spits the disc out and says ther is no disc. i have tried it with mp3 formats, regular discs i bought from the store and all that... please help me lol
Posted on Apr 15, 2008
Pressing reset helped me greatly.cd starting playing right away
Posted on Oct 17, 2006
Additionally, you might have bad parts in the CD Mech. Most of the time you can replace a few parts (gears etc) and it'll be fixed. But it's usually easier (though slightly more expensive) to just get a whole new mech.
Posted on Apr 10, 2006
SOURCE: cd ejection
Reset this unit by pressing and holding the power/ATT and SEL buttons at the same time for several seconds.
Posted on Mar 15, 2007
SOURCE: Cd wont eject.
I was having the same issue with my KD-S5050. I also tried the CD eject lock reset with no results. By using the following steps I was able to reset my CD player and it is working properly again. On page two of the user manual is shows how to do a full reset of the cd receiver. While holding SEL (Select), press ATT (Standby/On Attenuator) for more than 2 seconds. This will reset the built-in microcomputer. http://www.fixya.com/Brands/J/JVC/Manuals/kd_s5050_cd_d2ce2654fa2aab37f3ad2b4ce1e33443/images/KD_S5050_CD_D2CE2654FA2AAB37F3AD2B4CE1E33443_2_p2.jpg NOTES: ? Your preset adjustments ? such as preset channels or sound adjustments ? will also be erased. ? If a CD is in the unit, it will eject when you reset the unit. Be careful not to drop the CD.
Posted on Apr 12, 2007
SOURCE: jvc kd lx111 deck wont eject cd
I just had this problem today and when I attempted to eject the CD it would give me an error message that stated (ERR 32). Apparently this means that there is something blocking the movement of the screen, a little manipulation should help the issue. Another variable could be the Eject lock feature, essentially a "child lock" for your disc. When this lock is activated it prevents the CD in the deck to be ejected. You can change this by holding down the blue source button and the eject button simultaneously for about 2 or 3 seconds. A message should appear saying "No Eject" and one that repeatedly flashes "Eject on" These two things seemed to help me alot when I had this issue. If those things don't work I would recommend calling JVC, much to my suprise they were actually really helpful. Their number is 1-800-252-5722.
Posted on Jan 24, 2009
2,491 views
Usually answered in minutes!
I have the opposite problem (Pioneer DEH P8000R super tuner III).
CD won't eject. Went from working fine to one day - it loves that CD
in there. Where's the reset pinhole? any way to force it out?
well i have 96 pontiac bonneville with a factory cd player in it. it seems the cd player only plays when it wants too, and every time i put a disc in it spit it out after 3 sec. i dont know what to do? but my radio still works.
×