Question about Honeywell HZ910 Compact Heater

1 Answer

"Heater Turns Off" Part 2

Here's the solution that I was given first and my answers that follow: Best Solution by Kimi, posted on 26/10/05 First, turn it off. Start by cleaning your filter and making sure your thermostat is turned all the way up. second, it's possible that the pilot may need to be cleaned and /or the pilot is not getting gas to it. Other than this, it would be best to have a technician check out the heater. ~~~~~~~~~~~~~~~~~~~~~~~~ 1. It's already off and won't turn back on until I hit the reset button on the top. 2. There is no filter to clean 3. There is no thermostat to turn up all the way 4. There is no pilot light 5. It's doesn't use gas, It's electric! Here's a link to the product http://www.dealtime.com/xPF-Honeywell_Radiant_Heater I would just like to know why this heater turns itself off and I have to hit the reset button???

Posted by Vic Lei on

  • 4get Dec 22, 2008

    The blower works it seem the gas is flowing, on the keypad filter blipping. I went up the attic, check the heater and look for the 2 filters it suppose to have, but I didn't see any filter. It just blow cold air?

×

Ad

1 Answer

Jim Ellison

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had all the same problems. It turned off - still oscillates - no heat. Tried resetting - tried waiting (thought it might reset itself); Final solution ---took it back to Fleer Farm for a full refund even though it was over a year (had kept box & receipt). Honeywell wanted $10 shipping (for a replacement) plus the $10 I needed to ship. Considering I only paid $27.99, we opt'd for the return. I now have a Black/Decker Model 200UH that is built like a tank and keeps my old body reasonably warm in chilly Wisconsin.

Posted on Nov 01, 2005

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My central heating works fine but the tap water is just warm at best. You certainly cannot enjoy a bath!

Are we talking about a boiler situation? You mention "central heating" and tap water.

If it's a water heater separate from the furnace then I would say a element going bad, assuming it's a electric water heater. If it's a single boiler unit, I would have to say call a service tech.

In either case, you will need to post more information regarding the equipment before a reliable answer can be given.
0helpful
1answer

How do I get the heater to stay on?

What type of heater? make/model should always be given so we have a fair chance of giving a good answer. In light of a lack of information, I must assume it is a portable electric heater.

Try adjusting the thermostat/temp control and see if it turns on. If it turns on but shuts off after a a minute, you may have it to close to other objects or a wall. The heater output can be blocked or recycled back into the heater which will cause the heater temp control to warm up fast and shut off.
0helpful
1answer

I posted a question about the trouble Im having with my iPad 4, the sound has become loud and staticky and it seems to be related to the usb charger. - one answer given was the following: The problem

If it only happens when the USB charger is plugged in, try a different charger. Also, make sure that it is a legit Apple product, or a very good third party manufacturer.
0helpful
1answer

Can we use different walkie talkies together

Yes, provided the differing 2-way radios can be programmed to the same frequency and code. Post more information concerning the models and a more specific answer can be given.


Best regards.

0helpful
1answer

Heater turns on but not automatically

1) Copy following link to identify common water heater problem:
http://waterheatertimer.org/Crossover.html

2) Add a comment and include brand, model and type water heater. Or if you have clothes dryer, re-post question with information that appears on product label.

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

0helpful
1answer

The knob has nothing to do with question i asked i need to size size of wire for power

1) Copy following link for live answer Dec 2012 to figure correct wire size
http://waterheatertimer.org/Color-codewire.html

2) Fixya posts 'recommended' answers based on computer guessing what you asked. Look for date on each answer.
Recommended answers can be totally unrelated, but sometimes they are spot on. These answers were posted by experts over previous years, and now fixya owns the work done by others and uses that work to answer questions that live expert does not answer.

3) This particular Question was posted under 'Chrome timer knob set,' and somehow ended up among timer questions. Each expert answers questions by expertise such as timer, water heater, electric wiring etc.
Often the questions do nor show a product or clearly state what answer is needed. People do not always know what they are asking for. That's why fixya is here: to help sort out possible answers.
So the expert sometimes guesses at answer, or the computer guesses which recommended answers to post.

4) Add a comment for live follow-up, Dec 2012

If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7

1helpful
1answer

My Bosch Water Heater keeps going off. I reset it and then A7 keeps coming up. We had a power outage for about 6 days. I do not have the manual. Do you know what it is and how to fix it? Thank...

Questions might be asking for a manual, and asks what error A7 means, and asks how to fix error problem, but model number of Bosch heater is not given.
Error codes are start-point for troubleshooting, and can include multiple causes.
So following answer provides general do-it-yourself resources, without saying that problem can be 100% diagnosed or fixed by homeowner.

1) Error code A7 is outlet temperature sensor fault.
Problems include: need for descaling, dirty inlet water filter, debris in faucet aerators, dirty wiring terminals, bad wiring harness, or bad temperature sensor.
http://waterheatertimer.org/pdf/Bosch-GWH2400ES-error-codes.pdf

2) Before calling service technician who can test failed parts and catch tankless up on yearly maintenance, open following links for Bosch resources including error codes, phone number, possible manual, and descaling instructions, and cleaning inlet filter:
http://waterheatertimer.org/Troubleshoot-Bosch-Tankless-water-heater.html
http://waterheatertimer.org/pdf/Rheem-De-lime-tankless.pdf
http://www.boschhotwater.com/Portals/7/TechBulletins/TWH-G1-12_Cleaning_inlet_filter.pdf

3) Product manual: Question posted under model 125HX-LP
Open following link for possible manual:
http://www.boschhotwater.com/HelpfulResources/TechnicalSupport/BoschAquaStarModels/125HXTechSupport/InstallationManuals/tabid/542/Default.aspx

4) Do it yourself service bullitens for 125HX-LP
http://www.boschhotwater.com/HelpfulResources/TechnicalSupport/BoschAquaStarModels/125HXTechSupport/ServiceBulletins/tabid/548/Default.aspx

5) Take a moment and rate answer:
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on water heater or any do-it-yourself project.
Fixya is always less expensive than a service call.
0helpful
2answers

LOWER ELEMENT IS NOT GETTING ANY VOLTAGE ON MODEL 65220RS

Short answer: Thermostats may be bad. Replace both thermostats.
http://waterheatertimer.org/How-to-replace-thermostat-on-electric-water-heater.html

Long answer:
1) If water heater has some hot water, then upper element is good and water heater has 240Volts, and best suspect is burned out lower element.
http://waterheatertimer.org/How-to-clean-sediment-out-of-electric-water-heater.html

2) If water heater has no hot water because 240volt circuit breaker is tripped on one leg, and only 120Volts is arriving at water heater, then upper part of water heater can appear to have voltage and lower part of water heater can appear to have no voltage.
Open following links for troubleshoot steps:
http://waterheatertimer.org/How-to-troubleshoot-electric-problems-with-water-heater.html
http://waterheatertimer.org/Test-electricity-to-water-heater.html

Add a comment for more help
1helpful
1answer

Dishwasher miele g2582scvi fault code f25

Check this out.

F25 Desired temperature fault At the end of the wash program, the display shows the message Technical fault code F25 - Call Service Dept. The Status LED flashes. The buzzer is activated for 2 minutes. During the heating stage, the desired temperature has not been reached within the given time (minimum 75 minutes). In subsequent wash blocks, after this fault has registered, the heating is not activated and no rinse aid is dispensed.

Cause:
Heater defective.

Remedy:
Replace the heater.

Cause:
Heater relay defective.

Remedy:

1. Check the heater relay solenoid.

2. Check the heater relay solenoid voltage (12VDC) from the electronic.

3. Replace the electronic, if necessary.

Cause:
Excess quantity of detergent or rinse aid dispensed. Excess foam has developed.

Remedy:
Check the dispensed quantities of detergent and rinse aid. Follow the information given in the operating instructions F25 Desired temperature fault At the end of the wash program, the display shows the message Technical fault code F25 - Call Service Dept. The Status LED flashes. The buzzer is activated for 2 minutes. During the heating stage, the desired temperature has not been reached within the given time (minimum 75 minutes). In subsequent wash blocks, after this fault has registered, the heating is not activated and no rinse aid is dispensed.

Cause:
Heater defective.

Remedy:
Replace the heater.

Cause:
Heater relay defective.

Remedy:

1. Check the heater relay solenoid.

2. Check the heater relay solenoid voltage (12VDC) from the electronic.

3. Replace the electronic, if necessary.

Cause:
Excess quantity of detergent or rinse aid dispensed. Excess foam has developed.

Remedy:
Check the dispensed quantities of detergent and rinse aid. Follow the information given in the operating instructions
Mar 15, 2011 • Dishwashers
2helpful
1answer

My hayward heater fires up and then turns off after 2-3 seconds and displays "IF" fault code.

Thank you for posting your question here on Fixya.com.

The basics are covered in this excerpt from your owner’s manual. If you need direction or additional information about these steps please post your specific questions.

7975fb6.jpg


If this answer does not fix your problem, please comment with additional details prior to rating the answer. Positive feedback is appreciated once your problem is solved!

John
Not finding what you are looking for?
Honeywell HZ910 Compact Heater Logo

224 views

Ask a Question

Usually answered in minutes!

Top Honeywell Heating & Cooling Experts

Paul Carew

Level 3 Expert

3625 Answers

Cindy Wells

Level 3 Expert

6347 Answers

Dan Webster
Dan Webster

Level 3 Expert

8221 Answers

Are you a Honeywell Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...