- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I have had similar problems with DWL-2100 and (much less often) with DWL-3200. I have no solution, but a workaround: changing the authentication mode. For example, if the units are using WPA-Personal, I change it (on both) to WPA2-Personal or WPA-Auto-Personal. It doesn't seem to matter which mode is used, it's just the fact of changing it that helps (eventually). You may have to go through the process more than once. Also, realize that although the web interface comes up 30 seconds or so after a reboot, it may take another 30-60 seconds before a link is established, so don't give up too soon while trying these changes.
What you need to do is configure the dwl-2100AP. You need to login into the repeater's configuration page and go to Home tab, click on wireless on the left. Select AP Repeater under Mode. A new screen will show up. Click on the scan button to see if your router's signal is being picked up in the box. Just select the signal if you see it in the box and put in your security info if you have one.
To use the DWL-2100AP as an access point (repeater), You have to set it up on the repeater mode and type in the MAC address of the router. The best way to do this is to run the AP manager from the cd.
Here is a link to the D-Link support page. Click on product manual from under the Support resources http://www.dlink.com/products/?pid=292:
copy and paste the complete link into your browser. If I could be of further assistance, let me know. If this helps or solves the issue, please rate it. Thanks, Joe