Station memory problem

The best thing to do is look on Ebay or Amazon for a docking station that has connections for a stereo receiver.

Hello Mark, ask, do you do this with FM stations, like with AM stations?
If so, you may have a power problem with the radio stage, if it is only FM, check the antenna connection or you may have a problem in the Multiplex decoder circuit
If you can not solve it, I suggest you go to a specialized technical service
Greetings Franco Dosil

Hola Mark, pregunta, te hace esto con las estaciones de FM, como con las de AM?
Si es asi puedes tener un problema de alimentaci?n dela etapa de radio, si solamente es en FM , verifica la conexi?n de la antena o podr?as tener un problema en el circuito decodificador Multiplex
Sino logras resolver, te sugiero ir a un servicio t?cnico especializado
Saludos Franco Dosil
https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Kenwood-KR-820-Service-Manual.pdf

U test the suspected fuse with an ohm meter.

Kenwood kr-v 80 40 not warking display

Try manuals online.com

Rms the power Is a continuous power that an amp or radio should never run less than ,,,Max power is usually a gimmicky power that s rated by the manufacturer ,usually at a very high voltage and for a very short time .Do not pay much attn to Max power , Quality product rates their product in RMs and usually has test results printed for the consumer .

Hi,yes you can connect Kenwood KR-4600 to an ipod.


Instruction..

You will need an RCA cable .


Connect the RCA (red and black to the input of the Kenwood KR-4600...You have options of inputs to use..

Either input at the back of the Kenwood KR-4600,or tape A and tape B..which ever you wan to use..

After connecting the red and black RCA to Kenwood KR-4600, then connect the other jack end to the ipod, and go the front of the Kenwood KR-4600 to activate the input selection knob to the desired input being selected at the back of the Kenwood KR-4600..

And don't forget to turn on the volume of the Kenwood KR-4600 and also the iPod volume..

And after that your done..

Good luck to you..

it sounds like the button cell battery inside the receiver has gone bad if you take the cover off you will see it its about the size of a quarter. You can purchase a new one for around $4. Let me know if this works or if you need assistance in taking the cover off the receiver

Hi all,
may I ask if anybody solved the station memory problem
with Kenwood KR-A46. I do have the same and I dare to fix it
but I am looking for the right solution.
Thanks!
Ralf

Have same unit, exactly the same problem: station presets lose setting when power is off. I've opened the unit; there is no apparent battery of any kind.

As long as the unit is powered up, the station pre-sets seem to hold. There IS a capacitor across the power switch. Some A/C will therefore be transmitted into the unit when plugged in, even with the switch off. If the capacitor is open, no charge will enter the unit when the power switch is open. I will probably replace this capacitor and see if that fixes things, but it may take several days to do so. Has anyone else tried this?