Re: I have a furuno NaveNet about five yaers old and dont...
Go to Furuno's website and you should be able to download the manual. There are also DVDs you can buy but I felt they were all too general to be of any help, so I wouldn't waste my money on those.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Go to the website: http://www.furunousa.com. Search under the previous products, fishfinders, display size 6". Under either one you will be able to download the manual for free. If you have any problems email me: [email protected] and I will email you the manual.
You need to press and release the learn botton (don't hold it or you will clear all the codes) If the light bulb(s) on your operator are on the front and/or back, the learn botton is on the back of the operator. If the lights are on the sides of the operator then the learn botton is on the right side (looking from the back of the operator and facing the garage door). After you press the learn button you have about 30 seconds to press in the new 4 digit code in your key pad then hold the enter button until the light on the operator blinks (about 2 seconds). If this does not work check the battery and try it again.
You could try SeaClear It's free and runs not only on Windows systems but also on Linux with Wine. If you want to upload routes and waypoints then you can use this software from Furuno.
×