Question about Nerf N-Strike Longshot CS-6 Blaster

Open Question

Just bought Nerf longstrike and my son has put the cocking bolt together, but not on the gun! What is the easiest way to take apart the cocking gun so I can attach it properly? Thanks

Posted by natacha_hes on

Ad

2 Related Answers

ellarfixya

  • 2 Answers

SOURCE: My son put the cocking

Warning 1: this is a procedure for adults, not children - you may accidentally stab your own fingers.
Warning 2: this procedure might ruin the cocking bolt completely.
You'll need a small phillips head screw driver, two small flat-blade screw drivers, dental floss and four hands.
1) One end of the cocking bolt is fixed - leave this alone.
Remove the two screws from the inside face of the rotating end cap - this allows the outer cap to be removed.
The inner cap (still on the bolt) has four teeth that protrude into a recess around the metal bolt.
Warning 3: be extremely careful during the next step as the teeth may snap off completely and fingers could get hurt.
2) Using one of you four hands, hold the bolt upright on a sturdy table (with the fixed cap down) .
Simultaneously use the two flat-blade screw drivers to carefully lever one pair of opposite teeth out of the recess.
Whilst holding the levered the teeth out, firmly push the inner cap further down the bolt (down toward the fixed
end).
3) Wrap dental floss (or similarly stout, fine cord) around and around the recess to pack it out until it is flush with the outer diameter of the metal bolt - this is to stop the teeth locking back in place.
4) Slide the inner cap up and off.
Reassemble the cap.
Remove the dental floss.
Remind your son about the importance of reading the instructions first (just as you've always done yourself ;-).

Posted on Nov 19, 2011

Ad
send394

JayH

  • 1 Answer

SOURCE: HELP!!! My nerf gun maverick is broken.? when i

I had the same problem too. Try opening it up and looking at some online pictures and compare them, if you still cant find the problem and you have the receipt, take the unit back where you got it from. Look at the springs really closely my maverick was broken due to a spring that slid out of its elevated piece of plastic. I fixed it lubricated some parts and put it back to together. It works great now. :)





10_16_2011_4_30_06_am.jpg

Posted on Oct 16, 2011

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My NERF gun broke.


Take it back to where you bought it. It shouldnt do that, it sounds faulty to me. I am sure they will replace a faulty item.

Feb 26, 2014 | Hasbro Nerf N-strike Longstrike Cs-6 2010...

1 Answer

Bolt stuck in closed position after cleaning XL7 30 06


If you had the bolt sleeve or cocking piece out of alignment, it will jam. You should call 1-800-544-8892


to see what they have to say about it

Feb 22, 2013 | Marlin Model XL7 Rifle XLTL3006, 30-06...

1 Answer

The Rear Bolt wont **** fully


it sounds like your bolt is upside down try rotateing it 180 degrees

Dec 31, 2012 | Tippmann 98 Custom Act Paintball Gun

1 Answer

My son put the cocking bolt together before attaching it to the gun. We can't get it apart! Do you have any ideas or do we have to get replacement parts?


Warning 1: this is a procedure for adults, not children - you may accidentally stab your own fingers.
Warning 2: this procedure might ruin the cocking bolt completely.
You'll need a small phillips head screw driver, two small flat-blade screw drivers, dental floss and four hands.
1) One end of the cocking bolt is fixed - leave this alone.
Remove the two screws from the inside face of the rotating end cap - this allows the outer cap to be removed.
The inner cap (still on the bolt) has four teeth that protrude into a recess around the metal bolt.
Warning 3: be extremely careful during the next step as the teeth may snap off completely and fingers could get hurt.
2) Using one of you four hands, hold the bolt upright on a sturdy table (with the fixed cap down) .
Simultaneously use the two flat-blade screw drivers to carefully lever one pair of opposite teeth out of the recess.
Whilst holding the levered the teeth out, firmly push the inner cap further down the bolt (down toward the fixed
end).
3) Wrap dental floss (or similarly stout, fine cord) around and around the recess to pack it out until it is flush with the outer diameter of the metal bolt - this is to stop the teeth locking back in place.
4) Slide the inner cap up and off.
Reassemble the cap.
Remove the dental floss.
Remind your son about the importance of reading the instructions first (just as you've always done yourself ;-).

Aug 15, 2011 | Hasbro Nerf N-Strike Vulcan EBF-25 Blaster

1 Answer

My kid opened the Nerf N-strike Recon CS-6, loaded darts in the clip, shot it a few rounds, and now, somehow, the cocking mechanism is stuck in the middle position, and so is the trigger (like...


Take the rear bolt cover off ( 2 screws) . Reach inside with your finger and try spinning the spring. For some reason the spring will eventually move to a position that when compacted will bind with the bolt pass through hole.

Dec 25, 2010 | Nerf N-Strike Longshot CS-6 Blaster

1 Answer

I attempted to put a car stock on my Tippmann 98 custom and took apart the gun but the stock didnt fit, now when i put it back together and shot it with my tank connected the gun wont stay cocked and...


Check the O rings on the big metal striker, make sure that you have the spring on the back (where the stock would have went) in the right hole on the back plate. Make sure that your velocity is set to a reasonable level.

Oct 02, 2010 | Tippmann 98 Custom Act Paintball Gun

1 Answer

Nerf gun wont shoot its cocked and when i pull the trigger nothing happens


the relese mechanism came loose and i put the pin back in if anyone needs help ill be happy to help fix it

Sep 06, 2009 | Hasbro Nerf Dart Tag Strike Fire Two Pack

Not finding what you are looking for?
Nerf N-Strike Longshot CS-6 Blaster Logo

Related Topics:

462 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nerf Toys Experts

Andrew Taylor
Andrew Taylor

Level 3 Expert

35895 Answers

MODERATOR USA

Level 3 Expert

37616 Answers

Alyssa DeWolfe
Alyssa DeWolfe

Level 1 Expert

27 Answers

Are you a Nerf Toy Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...