There are settings in the menu to turn on the AIAF did you buy it used? maybe the settings need to be reset. If you have the manual there is a sequence you have to do to reset the camera to default settings. One thing to note this may or maynot be yoru problem. If the lighting is low and you have the correct settings the little box in the center will turn green. If they are not the box will turn yellow and beep a few times then give you a red number to indicate how much under exposed the image will be. When you need more light you should turn the flash on this is indicated by a lightning bolt on the display. If it is on then the image display will be corrected and then get brighter showing you an estimate of what it thinks the image will look like. Hope this helps
91 views
Usually answered in minutes!
×