Top 20
Westinghouse WST1550 Wired Deluxe Upright Vacuum Questions & Answers
Broken Belt for Fantom Crosswind 600XL
Hello, your Fantom vacuum will take a Panasonic U vac belt, to replace it, their are two screws in the back, one on each side of the back of the housing, take out the two screws and lift off the top hood, and the vac belt is on the side, remove the brush roller clean any debis away, put the new belt around the metal motor shaft first then around the brush roller, and pull down into the housing, make sure it locks in evenly, then turn the roller to make sure it moves freely. then put the hood back on front first, hold down and put the screws back in, in the back. now your ready to vacuum. Any question or more help I can give, please call 1561-848-3387 Thank you, Teresa.
How do I open the vacuum assembly?
you have to take the headlight lenses off with a small screwdriver. then a philips screwdriver to take the 2 screws out. one each side. then remove the foil shields on each headlight . then snap loose the rear plastic clips on the cover and it will come right off. it took me an hour to find out how and 10 minutes or less to take it off. watch for the micro switch on the circuit board being worn out.it will stop the roller brush from turning.its a dollar part at any good electronics store ,but will have to be soldiered in or service might have a few from the westinghouse line .so will a broken belt which is a special grooved belt available from fantom at 18007987395..
Cant get the "unplugged" to
Hi there,
Look at it from our point of view, with potentially
thousands of problems
for each product, and thousands of products, we need a little more from
you.
If you are serious about getting an answer, include Make,
Model of the product you "unplugged", what you are trying to do and if possible what you can't get it to do.
Describe
your problem
clearly, concisely and with as much detail as possible.
Often, a
problem can be the result of a seemingly unrelated event. It is always a
good idea to include a recent history.
Additional information
such as what steps have already been taken, has the product ever worked,
is it new, etc. can have a bearing on
providing the best solution for your particular circumstances.
Remember,
you are a key participant in this process. We are not there,
you are. We depend on you to be our eyes and ears. We can only
respond to what you provide us.
What you get out of the
experience depends on what you put in to it. So help us help
you.
It would be also be advantageous in your case to repost
your problem so that it starts over at the top of the queue.
Best
regards
Mike
Vacuum Cleaner never worked
these cordless units are no more than a broom. toss it out and go buy a real vacuum with a cord. FYI cheap vacuums are cheap vacuums. if you want something to last a do a great job you have to put out a little more money for it.
Does not give steam.
Actually there was no category for clothes steamer, and before entering information I was prompted to pick a category so I chose vacuums hoping that when my problem was diagnosed it would be understood that the problem is a clothes steamer that has stopped giving off steam. Please help if you can. I appreciated your time.
How do i fix a vacuum line hose on a car that's been cut?
Alot depends on the type of hose. There are plastic hoses and rubber hoses. Generally you can use a smaller plastic connector to connect two rubber hoses together and visa versa, Make sure it is a snug fix. You could also use an adhesive to keep it together.
3/19/2024 12:09:54 AM •
Vacuums
•
18 views • 0 helpful votes
Not finding what you are looking for?