Kenmore 38 Bottle Dual-Zone Wine Cellar - Page 5 - Answered Questions & Fixed issues

The Kenmore 795.73053 refrigerator is made by LG. The F dH code indicates that the defrost cycle took over 80 minutes or the defrost temperature sensor did not report a temperature over 46.4 degrees (F). This could be caused a failed or disconnected temperature defrost fuse, a problem with the defrost heater or a blockage of the defrost drain. If the drain opening is clogged by ice, pour warm water over the drain line until the opening is completely clear. The defrost heater could have the electrical wiring come loose. In that case, just replacing the wiring harness will solve the problem. Similarly, if the fuse is intact, try securing the connector so it doesn't come loose. If the fuse has failed replace it. If the fuse is good and no wiring is loose, replace the heater. Note: check the full model number of the refrigerator. The parts diagram for the 795.73053411 is here: https://www.searspartsdirect.com/model/3ubdo9sqjd-000582/kenmore-79573053411-bottom-mount-refrigerator-parts . The all parts list has the defrost heater. If you unplug the refrigerator for at least 30 seconds, the error code will be reset. Otherwise, the error will disappear after the system correctly defrosts. I hope this helps. Cindy Wells

20.7 cubic feet. Didn't I answer this already??

What Are Some Specifications of the Kenmore Coldspot ...

https://www.reference.com > World View The Kenmore Coldspot 106 is a 20.7-cubic foot side-by-side refrigerator with a reverse osmosis Pur water filter, ice maker and digital controls.

Hi, I'm seeing that it's 25.6 cubic feet on the Home Depot website. For further details, please search for the fridge on that website or reference the product manual of the fridge. The table of contents should allow you to find the specific page with fridge dimensions if not on the Home Depot website. Thank you.

Your water dispensing valve has gone bad. I don't have your model # but here's the most common location there's a valve in the very bottom (back) of the fridge... It's basically what the water line screws into. This is the valve that controls flow that's gone bad. You can head over to Repairclinic.com or appliancepartspro.com and purchase one, it's not a major job. Always be sure to unplug the unit before servicing. You'll need the Model # too. The sites shows where it's most likely located. Best to you!

It seems to be because it is a Canadian model! Where I am :>) You can probably order parts on the '970' model number alone. Most sites will give you a schematic. https://www.google.com/search?q=Kenmore+970-254324 ..

Hi, Please look for any arrows directing the connecting of the two on the back of either one of the elements. If you cannot find this, the we'll have to move onto using any construction instructions within the manual of your kenmore device. Otherwise, you might have to ask kenmore (via phone) to email you any video tutorials that they have available or be open to scheduling an in-home repair appointment with them. Thank you.

Hi, please double check that your freezer door is closing properly. You can also pull the fridge out and check whether the water is coming from the back of the of the fridge. If not, then that means there's a leak under the fridge and if that's the case you'll need to schedule a diagnostic on the fridge. You might reach out to Kenmore over the phone directly to ask them to send you a technician for this. Thank you.

Kenmore Elite 27.6 cu. ft. French Door-Refrigerator - Cool Style and Storage. Offering 27.6 cu. ft. of storage space, this Kenmore Elite French door refrigerator 7105 has all the functionality you need with the contemporary look you want. Features like the full-width temperature-controlled Full Width Pantry Drawer, deep door bins and slim in-door ice dispenser are designed to save space while providing optimum organization. GeniusCool™ and Multi Air Flow technologies work together to keep food fresh with digital temperature control and refined air circulation. The pull-out freezer drawer provides 8.79 cubic feet of frozen food storage with separate temperature and humidity controls.

• Built to store food, snacks and more, this Kenmore refrigerator delivers plenty of storage capacity so every item on your grocery list has a spot.
• A full-width, gourmet pantry drawer stores party platters, pizzas, pies, trays and more while clearing shelf space for better organization and easier storage.
• Spill-proof tempered glass shelves keep drips, drizzles and spills from spreading throughout the fridge, making cleanup fast and easy.
• A built-in water filtration system helps reduce contaminants such as chlorine, lead and mercury, for great-tasting water and ice that's better for you.
• Electronic controls combined with a digital display means quick temperature readings and push-button adjustments that are tailored to fit whatever food you're storing.
• Designed to stop icy build-up, automatic defrost uses a heating element to gently raise temperatures and reduce compressor ice, while keeping your food cool and safe.

The clue is in the model number, 106. is 10.6 cubic feet.

The clue is always in the model number 253. is 25.3 cubic feet.

You can use refrigerant gas detector spray. https://www.google.com/search?q=refrigerant+gas+leak+detector+spray ..

Yes plastic does turn colour over the years. I can also be caused by iron in the water. If the water is clear and tastes okay, don't worry about it.

25.3. The clue is in the first three numbers. :>)

Kenmore Elite Model # 79574033412. How do I remove the right crisper drawer? The frig door will not open enough to get the drawer out.

since no model number was given, check your owners manual or google kenmore ###.#### (model number) reset.

Hi, Please reference your devices manual to find the control panel. Thank you.

Get a ruler and measure the height, width and depth. Multiply them all together and that is the size, in Cu feet or whatever measurement you took.

Hey, thanks for contacting us. If water is building up in the freezer's bottom, you may need to check for its drain tube. Drain Tube might be clogged or frozen. you may need to defrost it and remove any Ice clogged in the tube.

I presume that the party from whom you purchased the house did not leave the original sales bill or warranty card for the refrigerator. Such items typically have the model number. Bearing you are without that documentation, you have to know where to look on the refrigerator for the model number. There are two labels on the refrigerator that have the model number. The first one is situated at the lower left of the refrigerator's exterior. Look at the frontal part to find this label. The other label is attached inside the refrigerator. Simply open the refrigerator to find the model number. The number is located near the top shelf. Check on the sidewall of the top shelf. You will likely find the model number there! I realize you have found a number but that one is a dead end for me. The number you are looking for should have 3 digits followed by a period and that period is followed by more numbers. Kenmore support should be of greater assistance than I can be without knowing the model. I would hate to try to figure out the model by measuring its capacity and looking for models with such that were over six years old. If the tips on finding the model number don't pan out, perhaps Kenmore support will have better advice: https://www.kenmore.com/contact-us