20 Most Recent Krups Compact Automatic Espresso XP 7245 - Page 2 Questions & Answers

https://www.youtube.com/watch?v=4WDRw3hfJNg

Your machine makes 4 levels of coffee. Espresso, strong espresso, coffee and long coffee. The strength is controlled by the knob on the front of the machine. Page 7 in the user manual.

Today I fixed mine krups ea8108 by changing the heatblock NTC... With a 3D printer NTC 100K ohm.... I just screw the new NTC together with heat blow fuses... See pictures... NTC can be unglued / removed from the heat boiler block with a screwdriver... Stock NTC is 100K ohm in case you wonder... My problem was that machine didn't preheat on power on... it was heating only with steam button... Simple replace ntc with 3d printer ntc or any other 100K ohm ... Solder it to normal connector cables and done... Final result: Stock ntc: behind stock ntc: New ntc cables joined to normal ntc connector cables: New ntc:

notify krups

have you ever tried spray contact cleaner

then try Krups directly we do not know if they sell parts or not

contact Krups directly and see if they have any clue

nothing if it is working live with a flickering light

Maybe you need to supply the model as well, it's not an error code on the models I'm familiar with. Try editing it into your question or ask a new question with the information within it.

ALL DOLCE GUSTO MACHINE HAVE A TEMPERATURE BETWEEN 60C TO 80 NOT OVER

CHANGE MOTHER BOARD

what is the model?

you have to open it. you probably have to replace the seal from under the boiler. quit a bit of doing but if you do it slowly you will be able to make it take photos if you have to

very bad news, if it keeps heating the thermal safety, will eventually blow due to overheating .you may have a shorted switch or PCB mainboard shorted and is keeping the machine on at all time which is more likely to happen even sow when having internal leaking .

Contact Krups direct. Tell them we sent you

Accessories and spare parts AUTO DOSE COFFEE GRINDER ...

www.krupsusa.com > Beverages > Coffee-grinder > csp

The largest selection of original spare parts and accessories for AUTO DOSE COFFEE GRINDER WITH SCALE GX420851 on Krups's official online shop.

accessories and spare parts for AUTO DOSE COFFEE ... - Krups

www.krupsusa.com > Beverages > Coffee-grinder > csp Accessories Store : buy all original accessories, spare parts for AUTO DOSE COFFEE GRINDER WITH SCALE GX420851 GX420851. Officiel Krups Website.

Try this, remove the tank, the drip tray, the bin on the side and the sliding thing above the bin. Hold down the on and steam buttons while plugging the machine into a live socket, it's either that or the same again but holding down the on button and the program button while plugging it in. You will get a screen that says something like " Remis a something vende" which is French for put it into sale state, you choose "Oui" for yes. It's been a long time since I've done one but that's as best as I can recall. It will zero the coffee counters as well.

Contact Krups to request.

Could be the portafilter ratchet issue

Krups would be a possible source.