20 Most Recent 2-Way Remote Starter Questions & Answers

why don't u try online websites..
some websites deal in it real time. . along with solutions to problems how to repair fix service nd all let me know if u need help I know plenty

2-Way Remote... | Answered on Jan 28, 2019

u will find a lot of wiring diagrams, codes etc and circuit diagrams help books and stuff like this at online places.. like reliable-store
for free

the girl in the chat box can help u instantly... im a frequent buyer there since Im a mechanic so take help from there

2-Way Remote... | Answered on Jan 24, 2019

May be check the battery terminals to see if they are dirty or loose...
& check the water level in the battery to see if theres any there At all??

2-Way Remote... | Answered on Nov 12, 2014

You did not mention the details of your vehicle but the most likely cause is not having a bypass module installed with the remote starter. The reason you may need a bypass module is to replicate the function of the chip that is imbedded in your key.

2-Way Remote... | Answered on May 18, 2014

If you are a professional installer then there are numerous technical support sights to access the wiring diagrams for the vehicle. However, what you really should be worried about is the EVO- ALL and how it connects to the Crimestopper unit that you are using. You have to be certain that the hardware and firmware versions are up to date on the EVO. You can find this by examining the label on the EVO unit and, the installation manual that lists the required versions for the vehicle.

2-Way Remote... | Answered on Mar 10, 2014

get the manuals for your car starter this should have instructions for programming another remote

2-Way Remote... | Answered on Feb 02, 2014

from http://www.crimestopper.com/techweb/InstructionBooks/RemoteStart/rs1300dp_1304dp_a_ops.pdf Note: All transmitter codes must be learned at time of programming!! The unit will learns up to 4 different transmitter codes. 1. Open Hood (If no hood pin installed with your system, then you must ground the Gray Hood pin wire). 2. Turn key to the ON position. (Pink wire must be connected.) 3. Press Programming button 4 times, then after a few seconds the unit flashes the parking lights 4 times. 4. Press button #1 of the transmitter to be coded. You should get 2 light flashes indicating the unit is waiting for a 2nd code, then press button #1 of a second transmitter, the unit will flash 3 times indicating its waiting for the 3rd code and so on. If all 4 codes are learned, the unit will automatically exit code learning mode, otherwise turn key off and close hood. See diagram below.

2-Way Remote... | Answered on Dec 31, 2013

Have you check the batteries?

2-Way Remote... | Answered on Dec 16, 2013

I need to reprogram my chx433tx remote

2-Way Remote... | Answered on Dec 12, 2013

Either hit lock then the start button once if that doesnt work Hit lock and then start button 2x.

2-Way Remote... | Answered on Nov 13, 2013

you have to get the exact remote as your old remote and it will tell you how to program it

2-Way Remote... | Answered on Nov 12, 2013

Not finding what you are looking for?
2-Way Remote Starter Logo

119 questions posted

Ask a Question

Usually answered in minutes!

Top Crime Stopper Vehicle Parts & Accessories Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Joseph Prosser

Level 3 Expert

775 Answers


Level 3 Expert

375 Answers

Are you a Crime Stopper Vehicle Part and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Crime Stopper Vehicle Parts & Accessories

  • Crime Stopper Vehicle Parts & Accessories

Most Popular Question

cool start remote needs reprogramming

  • Vehicle Parts & Accessories