20 Most Recent
Lucent AT&T Speakerphone 822 (21213) - Page 4 Questions & Answers
All phones dead, no power
Either no power from the electrical outlet, or the power supply in the phone system is damaged. Sometimes there is a fuse in the phone system that can be replaced. You probably don't have to replace the entine system. Also, you may be able to simply unplug, then plug the AC power back in. Then wait a few minutes for the system to load back up.
We have a Lucent Partner 34D and need to reset the
Changing the time on a Partner system is done on either ext 10 or 11. At one of those ext's press the feature key and "00"
next press the left hand intercom twice
the display should say system programming
enter in "#103"
the display should say system time and the current programmed time
enter the new time in 24 hour format
press feature "00" to logout
I have a Lucent Technologies Partner Mail VS
Sounds like theres a posibility that the voice mail crashed. Can you access your personal mailbox? Also there are lights on the front of the voice mail card are any of them lit? Lastly, Is the date and time on the system correct or is it back to Jan. 1?
Lucent Magix Avaya
Magix is discontinued product. Suggesting upgrading to IPOffice.
Then you will be able to see if carrier is the real problem.
Lucent 854 phone, how do we turn up the ringer?
To Adjust Ringer Volume:
1) Press CONF, then using the dialpad press either 1, 2, 3 or 4 to indicate which line you want to adjust.
2) Press one of the VOLUME buttons to increase or decrease the ringer volume.
To Turn the Ringer Off
1) Press CONF
2) Use the dialpad, press 1, 2, 3, or 4 to indicate which line you want to adjust
3) Press the down VOLUME until you no longer hear a tone.
How do I mute my MLS-34D when using Speakerphone?
5104,
The button that mutes the speakerphone is the mic/HFAI key located above your speaker button. The mic mute feature works while using the speaker, when the phone is idle it works as the handsfree answerback intercom.
hope that helps,
I have a partner 18
Log into the voice mail as system administrator and reset it.
The administrator's procedure would depend on which voice mail system you have, but it should start with 770 99 xxxx.
Carl
I have a lucent 4412D
I just looked through the administration and programming manuals and it cannot be done.
Put phone numbers in my
you can simply type the number in as if you are making a call. then click options and save. then go from there.
Not finding what you are looking for?