NEC Electra Elite 32D-1 Corded Phone - Answered Questions & Fixed issues

0helpful
1answer

We have line 6 dedicated with a special voice mail and would like to turn the ringer off on that line only can this be done?

Ringing assignments are done by the system programmer. No you wont be able to shut it off by yourself.
8/29/2016 10:58:22 PM • NEC Electra... • Answered on Aug 29, 2016 • 67 views
0helpful
1answer

Local Electrical outage has left our phone system void of all programming

Hope your vendor has a back-up so they can download it to your system and you'll be off and running. Trying to piece together the database that you weren't familiar with is a tedious and unlikely process. Get the internal battery replaced so this doesn't happen next outage.
8/29/2016 10:30:17 PM • NEC Electra... • Answered on Aug 29, 2016 • 55 views
0helpful
1answer

Feature light blinking

Ext 163 called you, and pressed # or * to leave a callback request. Call 163, make sure they answer by lifting handset, should go away.
9/19/2014 2:59:41 AM • NEC Electra... • Answered on Sep 19, 2014 • 161 views
0helpful
1answer

How to conference call on a nec dtu 32d 1a phone?

When your're on a call, you press Conference, get internal dial tone, dial the extension you want or 9 plus the whole outside number you want, then press Conference again to tie the calls together. Some exts only have access to one call at a time, so if you can't make 2 calls at a time, this feature won't work.
9/19/2014 1:45:16 AM • NEC Electra... • Answered on Sep 19, 2014 • 178 views
0helpful
1answer

NORTEL M7310 can enter **CONFIG, but no digits

phone buttens fault
10/1/2013 2:39:03 PM • NEC Electra... • Answered on Oct 01, 2013 • 27 views
0helpful
3answers

NEC DTH16D-1 flashing light

I do not deal with your system but I see similar problems in other phone systems. This MAY be what is happening...

 

The message light can be a voice mail indicator OR someone on another phone in the building can leave you an intercom message (no voice system used or required). In those cases you need to return the message by pressing the MSG button, this should make the phone ring that left you the message in the first place. That phone needs to be answered to return the message and cause your light to stop flashing.

12/22/2012 1:16:05 AM • NEC Electra... • Answered on Dec 22, 2012 • 1,311 views
0helpful
1answer

DTU-32D user manual

http://www.ecitech.ca/website/sections/support-services/pdf/elite-user-guide-series-e-phones.pdf
12/12/2012 9:22:49 PM • NEC Electra... • Answered on Dec 12, 2012 • 552 views
0helpful
1answer

How to use NEC ip1ww-12txh

how to removing auto receving incoming call
11/17/2012 12:05:53 PM • NEC Electra... • Answered on Nov 17, 2012 • 753 views
0helpful
1answer

My voicemail has been set

Set your Call Forward Busy/No Answer to go to voice mail ext. as follows: Lift the handset, dial 4 then 3 followed by the voice mail ext. (the number you dial to retrieve voicemail messages). Hang up.
1/25/2012 8:47:58 AM • NEC Electra... • Answered on Jan 25, 2012 • 270 views
0helpful
1answer

How do change the outgoing "Night Mode" message in the Voice Mail System on NEC Electra Elite DTU 32D-1?

If you are using an Active Voice product (typical w/ NEC) you need to change the hours of operation on the voice mail system. "Night Mode" only changes the ringing characteristics of the phone system and where calls ring, not the greetings that play on the voice mail. The voice mail plays a particular greeting (Day/Night/Holiday) based on the time of day specified in the schedule. The system administrator for the voice mail would have to make this change.
1/25/2012 8:40:29 AM • NEC Electra... • Answered on Jan 25, 2012 • 1,749 views
0helpful
1answer

My call tranfer/intercom button keeps

Hello.

Give this a try:

Do not pick up handset
• Press Feature
• Dial 69
• Press Feature

If still a problem, disconnect the power and cable to the phone. Wait 10 minutes and reconnect.

Hope this helps.
3/28/2011 6:22:47 PM • NEC Electra... • Answered on Mar 28, 2011 • 73 views
0helpful
1answer

I cannot figure out how to use the answering bank

here ya go!!......http://rds.yahoo.com/_ylt=A0oG7ktpVfdMBxMBFCNXNyoA;_ylu=X3oDMTE1cW8ycDZwBHNlYwNzcgRwb3MDNARjb2xvA2FjMgR2dGlkA1NNRTAxOV8xNjg-/SIG=124s9bbea/EXP=1291364073/**http%3a//www.matrixcommunications.com/elitefaq.pdf
12/2/2010 8:15:17 AM • NEC Electra... • Answered on Dec 02, 2010 • 37 views
0helpful
1answer

How to change time setting on a DTU-32D-1A9BK) TEL

First it needs to be done from the swithboard phone (Extension 100) port 1 or 2
1- Press Feature
2- Dial 9
3- Dial #
4- Dial Current time eg 03:29
5- Press Recall to toggle AM/PM
6- Press Hold to advance to the calendar
7- Press Recall to select the day of the week
8- Press # to move the cursor to the day of month setting
9- Enter the day by using the dial pad
10- Press Recall to select the month
11- Press # to move the cursor to the year setting
12- Enter the year by using the dial pad (only the last two digits are entered)
13- Press Feature
If only setting the time, press Feature after making the changes.
10/8/2010 5:49:06 AM • NEC Electra... • Answered on Oct 08, 2010 • 1,723 views
0helpful
2answers

Turning on background music

FEATURE + 26
5/17/2010 3:17:06 PM • NEC Electra... • Answered on May 17, 2010 • 611 views
0helpful
1answer

Does anyone know how to turn on the caller ID

you need to subscribe to Caller Id from the phone company! If you already have it, it should work, otherwise I would check with your NEC contractor.
2/9/2010 8:40:43 PM • NEC Electra... • Answered on Feb 09, 2010 • 406 views
0helpful
1answer

I want to move a phone. What do I need to do?

All you need to do is find the phone jack nearest to where you want the phone and plug it in. If the phone cord is plugged in properly, and the interior wiring of the house is in good shape, you should hear dial tone.
If not try moving the phone to a different phone jack until you do get dial tone.
1/22/2010 10:14:21 PM • NEC Electra... • Answered on Jan 22, 2010 • 120 views
0helpful
1answer

The feature light is flashing

USE THE MENU BUTTON & LOOK AROUND . IT I AN ALARM OR STATION MESSAGE, CLEAR ALL OF THEM.
10/31/2009 7:39:32 AM • NEC Electra... • Answered on Oct 31, 2009 • 670 views
0helpful
1answer

The display screen on my DTU 8D is all black

Try adjusting the display by using the arrow keys on the bottom right of the phone. The phone must be idle to do this.
7/8/2009 2:27:51 AM • NEC Electra... • Answered on Jul 08, 2009 • 330 views
0helpful
1answer

Hello I would like to know how to diconnect the

It sounds like your auto attendant is DIT for both day and night. You can setup a schedule in programming and use the night mode function, but it depends on the type of system. It is a little more detailed o program, you should have a tech do it or call for remote support and someone can walk you through it.
ldtsnj,com
7/8/2009 2:07:33 AM • NEC Electra... • Answered on Jul 08, 2009 • 196 views
0helpful
1answer

HOW DO I GET THE ELECTRA ELITE IN MY OFFICE TO

you need to acces program mode and change 4-01 to assign ringing for the extensions you want to ring. ldtsnj.com
6/16/2009 1:45:04 AM • NEC Electra... • Answered on Jun 16, 2009 • 557 views
Not finding what you are looking for?
NEC Electra Elite 32D-1 Corded Phone Logo

116 questions posted

Ask a Question

Usually answered in minutes!

Top NEC Lands Phones Experts

Oloyede Monsuru

Level 3 Expert

1468 Answers

ray gallant

Level 3 Expert

73010 Answers

Ekse

Level 3 Expert

13435 Answers

Are you a NEC Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...