20 Most Recent NEC Dterm DTP 16D-1 Corded Phone Questions & Answers

1) pry off the top keypad cover 2) unlatch the clips in back of the screen by squeezing the arms together to release the display from the base 3) lift up the LCD display and pull forward to slide the hinges out to the openings and lift up and out.

NEC Dterm DTP... | Answered on Apr 07, 2020

Press the "Speaker" button and enter 728 on the key pad. Then enter the correct time in 24 hour format. For example at 2.56 p.m. type 1456. Then press speaker again and you're done

NEC Dterm DTP... | Answered on Mar 11, 2020

press spk 8181 that will put board back into day mode

NEC Dterm DTP... | Answered on Feb 12, 2019

Ringing is assigned in system programming, either a tech or your office in house tech will need to make the change.

NEC Dterm DTP... | Answered on Dec 12, 2018

Try Googling (NEC)(16D-1)(manual) without parens for instructions.

NEC Dterm DTP... | Answered on Sep 02, 2017

It took me forever to find out, but heres what you do.

with the phone hung up:
1) "Feature" then press "1"
2) then press "#", "*", "#"
3) lift the phone, then hang up
4) press "Speaker"
5) dial "700"
6) press "hold"
7) enter the name (I'm still trying to find out how to leave a space, or use aother character that the same number key has... ugh"
8) press "hold" then "Speaker"

then make sure it saves it in the directory

NEC Dterm DTP... | Answered on Jan 24, 2017

If your phone is set to ring then the Answer key should also flash during incoming call, you can use that. If its not set to ring there is a program to set Answer key to flash without the ring, but it's in system programming, likely a vendor thing.

NEC Dterm DTP... | Answered on Aug 29, 2016

Press the voice mail button or dial the pilot for the voicemail, enter the password or ID your own extension (9+ext) on really old voicemails, then password, listen to the prompts or use the active buttons in the display.

NEC Dterm DTP... | Answered on Aug 29, 2016

Program 4-18 is where name assignment is done, but u likely are not familiar with system programming. This is not a user feature.

NEC Dterm DTP... | Answered on Aug 29, 2016

You can program a headset key in programming for that phone. But you would need to know how to acess programming and add it. Also what type of phone system. ldtsnj.com

NEC Dterm DTP... | Answered on Aug 09, 2016

If you have a DTP-16D phone, I believe that device was used primarily on the NEAX 2000 system by NEC. If that is true, you can try the default DND cancel code: #8 (*8 sets it). Unfortunately, the system codes CAN be changed by the installer, so it could be something else. Please let us know if that works. Thanks.

NEC Dterm DTP... | Answered on Oct 17, 2015

Not finding what you are looking for?
NEC Dterm DTP 16D-1 Corded Phone Logo

499 questions posted

Ask a Question

Usually answered in minutes!

Top NEC Lands Phones Experts


Level 2 Expert

177 Answers

ray gallant

Level 3 Expert

69239 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

34094 Answers

Are you a NEC Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

NEC Lands Phones

  • NEC Lands Phones

Most Popular Question

nec dterm 80 display

  • Lands Phones