20 Most Recent General Electric Washing Machine Chrome Timer Knob W/Clip Questions & Answers

Older washing machines had a 2 position knob push or pull to set and the other position to run, also if the timer is bad it can be replaced the parts are still available on the Internet.

Have a good day...
Tim

HI THERE,

better do checking also on the control board, must be check and clean also the contacts.

I found my manual...simplified version: 1) On the panel - press the manual button 3 times until Auto is lit - the remote can now be used 2) press on - on the remote 3) press the desired time (2, 4, 6 or 8 hours) on the remote 4) press repeat on, on the remote Timer should be set!! =) Pressing auto off wipes out anything that was programmed!! Pictures attached!

You will get one on eBay uk

http://waterheatertimer.org/How-to-set-timers.html Link above shows hot to set analog timers Gene Water Heater Timers Save Money If you need further help, I’m available over the phone at https://www.6ya.com/expert/gene_9f0ef4df2f9897e7