20 Most Recent Paragon 8145-20 Defrost Timer - Page 4 Questions & Answers

contact www.electricalexpeditors.com

Try this link, lots of good pictures

http://www.icca.invensys.com/paragon/parts_accessories.htm

how to wire a timer  8145-20  for a cooler

Your refrigeration circuit should be connected to terminal # 4, as this is the normally closed set of contacts, and the heaters should be powered from terminal # 3 as this is the normally open set of contacts. Hope this helps.

The gears may be binding if the dial will not turn. If this is the case the internam mechanism must be replaced.

You can contact Paragon tech support at 800 445 8299 (navigate to the paragon defrost timers in the automated phone system). They can give you the replace mechanism number and where it can be purchased.

try the uniline website

visit electricalexpeditors.com and send iquiry

leave iquiry at electricalexpeditors.com

visit electricalexpeditors.com and leave inquiry

go to uniline.com

electricalexpeditors.com

I am not sure of your wiring but see no reason that you could not run straight from the breaker to the timer and the timer to the freezer. Determine how long you want the defrost time to be on each hour and set the pegs accordingly. This is if I understand or picture your timer correctly. You have a walk in Freezer, and a rather large box 110 volt timer,correct? The pins on the 24 hour timer wheel can be taken off or moved? If I am wrong, I am sorry. I have the wrong picture in mind. 

Question edited for clarity and spelling bottoms to buttons, and dose to does. Question moved from Television category. Cut the mains power to it for an hour. Of contact one of the distributors. https://www.google.com/search?q=Paragon+timer+model+EL71%2F120 ..

notify a lock smith

https://www.google.com/search?q=Paragon+Slimline+2&oq=Paragon+Slimline+2&aqs=chrome..69i57&sourceid=chrome&ie=UTF-8

http://www.paragonlockandsafe.com https://teamcustomerservice.com/key

Possibly order it from Amazon and have it shipped to you in Canada. https://www.amazon.com/X2772-Set-Paragon-Replacement-Trippers/dp/B00441YVCO/ref=asc_df_B00441YVCO/?tag=hyprod-20&linkCode=df0&hvadid=312126272150&hvpos=1o1&hvnetw=g&hvrand=15041707694070638003&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=1027317&hvtargid=pla-570363862953&psc=1

BIG BEPIS!!!!!

That unit is not made any longer. I hope that you have shut off the electricity before you started working on it. You may need to remove the whole motor timer assembly from the housing in order to get the time pointer set back into position

Beverly, Go here for your MANUAL... SCROLL DOWN 3/4 way for schematics! https://www.peerlesshouston.com/manuals/8ozpopcorn.pdf Anthony (Please SAY "Thank You"!)