20 Most Recent
Aube Technologies Aube 7-Day 40-500w Light Switch Timer - Page 4 Questions & Answers
Light timers are tripping internally
It is possible that there is a bad ground connection somewhere between the lights and the timer, especially if the problem persists even after replacing the timers. It is also possible that the lightning strike caused damage to the electrical system, which could be affecting the GFCI outlets. It may be a good idea to have an electrician inspect the wiring and outlets to ensure they are safe and functioning properly.
Apt type no imm 24 tiime clock connected to a central heating oil boiler, earth terminal
Based on the information you provided, it would be like describing an electrical cover or box with some wiring harness. It is important to note that working with an electrical system requires caution and knowledge of electrical safety practices. If you are unfamiliar with electrical work, it is best to seek the help of an electrician to avoid potential hazards. Having said that, if you're looking for the end of the earth, it's usually indicated by a landmark (square with a horizontal line) or the letter "E". There is one that helps with surge protection and proper grounding of electrical appliances.
Aqua plus timer turns on filter, but will not turn it off. Filter works on and off manually
If your Aqua Plus timer is successfully turning on the filter but is not turning it off automatically, there could be a few potential causes for this issue:
- Timer Programming: Double-check the programming of the Aqua Plus timer to ensure that the off time for the filter is correctly set. Verify that the timer is configured to turn off the filter at the desired time. Review the user manual for the Aqua Plus timer or consult the manufacturer's website for detailed instructions on how to properly program the timer.
- Timer Power Supply: Check the power supply to the Aqua Plus timer. Ensure that it is receiving a consistent and uninterrupted power source. Any power disruptions or fluctuations can affect the timer's functionality. Confirm that the timer is properly connected to the power source and that there are no loose or damaged connections.
- Defective Timer: It's possible that the Aqua Plus timer itself is faulty. If all the programming and connections seem correct, but the timer still fails to turn off the filter, it may require replacement. Consider contacting the manufacturer's customer support or consulting a pool professional for further assistance or potential warranty coverage.
- Manual Override Switch: Some timers have a manual override switch or button that allows you to manually turn the filter on or off regardless of the timer settings. Ensure that this switch is not inadvertently set to the "On" position, as it would override the timer's control.
If you have exhausted these troubleshooting steps and the issue persists, it is recommended to reach out to the manufacturer's customer support or consult a professional pool technician. They can provide further guidance and assistance in diagnosing and resolving the issue with your Aqua Plus timer.
How to repair a Defiant Motion Security Light.
try this
turn on the light at night
if it doesn't turn off after say 5 minutes (you should be able to set the stay on time)
switch off and back on
for most security light operations that action places it in the watch mode
the light will come on immediately but will go off after the set time period
from then on any intruder movement should set it on fort the set period of time
Not finding what you are looking for?