20 Most Recent Karcher Hose Reel - Page 2 Questions & Answers

It should be a Honda GC160 engine.

OEM sparkplug is a NGK BPR6ES @ .030 in. gap

Question edited for clarity. It is not mentioned anywhere https://s1.kaercher-media.com/documents/manuals/raw/000/BTA-5173594-000-04.pdf https://www.manualslib.com/manual/1134933/K-Rcher-G-4-10-M.html?page=20 They used to use Honda engines, but my guess is they now use Chinese engines that cost one bowl of rice instead of four. Seems to now be a history of hard starting. https://www.google.com/search?q=Karcher+G4+10%2C+engine+make ..

If you can hear the vac squeaking as you run across the window, you've just not applied enough liquid. Just go over the window again with the spray bottle and microfibre cloth and then vacuum the liquid away.

I had the same problem. I removed the spray part of the spray gun so I was on soap setting and I had water but when I reconnected the spray wand same thing. * I turned out to be a little bit of grit was in the nozzle. I cleaned out the grit and my spray cleaner worked without a problem.

Not sure what the 'o.eltro' means? There is help in the link and the service manual for a different series of HDS washers. You could also contact Karcher direct. https://www.google.com/search?q=karcher+hds+745+wiring+diagram ..

This is normal. The high-pressure car washer has certain dangers. If the water column of his spray gun is aimed at people, it will stab people. If the switch is turned on and spray water, then the pressure of the spray gun head will be sprayed around, which will accidentally hurt people. people, so it's designed this way.

None of these fixes works for me and the original poster, like me what he's saying is when he swaps the high pressure lance for the patio attachment it pulses on and off, but when that happens, you can swap back to high pressure lance and it's fine. This means it's the patio attachment not any valves or power source, I have the same problem

Hi I have the Same problem with my K5 tTy this it seem to have worked for me firstly I put the C clip in the vice and squeezed it to make a tighter fit then I put a cable tie on the end to keep the pressure on the clip I put the clip on from the back for better access

This is a rounded square. As long as the bolts are in the right place. The flange is just a mounting to connect engine to the pump drive. Or phone Karcher and query it. They are a good company to deal with and friendly on the phone. https://www.ppe-pressure-washer-parts.com/karcher-hd3101dr-pressure-washer-parts Karcher Contact https://www.google.com/search?q=Karcher+contact ..

Greetings from Toronto :>) Two different wands for different uses and one has a low (hardly any) pressure mode for spraying detergent. Have you read the manual? I found it. https://www.ppe-pressure-washer-parts.com/files/1961581/uploaded/K3.48M.pdf ..

Clean water intake side. Usually there is a fine filter inside. Clean clogs on output side. Nozzle. Spray head.

This will depend on where exactly it has broken on the inlet pipe and if Karcher sells the spare you need. Some inlet ports are 'screw-on' adapters and they can be swapped.

Question edited for clarity. Question moved from Washing Machines to Karcher Pressure Washer. Probably a broken impeller. Strip down, service and replace o-ring seals. https://www.google.com/search?q=karcher+hds+601+c+no+pressure ..

Isn't there a bleed off valve on the unit. Typically they get stuck and pulsing is the result.

sorry we have no answers for any unknown problems contact Karcher tech support

https://www.sosav.com/guides/cleaners-hp/karcher/karcher-k4-ecologic/wheels/ Spudger to remove the plastic hub, K4 K5 ..

Either Red or white diesel from the pump.

Manuals https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk00eqXHu2tBBwzGDo8KBJyPtJWGKsw%3A1613854276693&ei=RHYxYIbjKeqGggfKzJW4AQ&q=karcher+hds+555+ci+manual Parts https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&sxsrf=ALeKk03ElXW6hfAa_obIqSTD_1dRRNtCdQ%3A1613854361260&ei=mXYxYNmND-Smggfo-KKwCg&q=karcher+hds+555+ci+parts ..

Test the switch and check wiring

Hi How i shall connect the 4 cable to the switch 700-2/6 its for cable. Blacc-Brown- blow- rosa. Best regads George