20 Most Recent Campbell Hausfeld PW2102 Gas Pressure Washer - Page 4 Questions & Answers

this is called the chemical injector which enables you to insert the hose for you to dispense the soap and or chemical by utilizing a soap nozzle .apparently inside this barb you will find a ball a spring and a o-ring,find the replacement parts or kit from its manufacturer.finding a plug to replace it is not recommended due to the fact that the pitch of thread is hard to find.replace asap this unit relies on trap pressure to unload.

keep the briggs if your just gonna use it for yourself get the sjv axial pump 239.00 put it on your briggs.many retail stores use s disposable pump no sightglass or drainplug sjv has forged brass head no pot metal.

What is the question?

you need to reseal the pump but look for cracks it might have froze during the winter

In order to get the system to pick up whatever solution you have the pickup tube in, you have to use the black, soap tip on the spray wand. If you use any of the high pressure tips, usually red, yellow, white or green, there will be too much pressure in the line for the siphon system to work properly. There is no way to control how fast the system picks up the cleaning solution, so if it's using your solution too fast, dilute it with water in a five-gallon bucket so it doesn't go through your product so fast. After you use the soap tip to soak down whatever you're cleaning, switch to the appropriate pressure tip and rinse everything down.

Probably a bad impeller or waterpump. I have had this problem my self several times... Need to go into the shop or you can change the water pump yourself and save some money. Good luck.. HDTV GURU JAY.