RCA 25414RE3 Corded Phone - Answered Questions & Fixed issues
How do I stop the red message light from blinking after I have received my messages
~*~*~ SOLVED SOLVED SOLVED! ~*~*~ After talking to both ATT and RCA with no success...I figured it out. ~*~*~ Plug your phone line into the "DATA PORT" on the back of the unit. Slide the "DATA PORT" switch to whichever line is showing it has a message. Press the corresponding Line# button on the front of the phone. (you should hear the dial tone) Dial your voice mail number. Let it answer, (enter your passcode if needed), then hang up! - That's it! example: MSG Waiting:L2 - I plugged the phone line into the Data Port and moved the data port switch to "2". I pressed LINE 2 on the front of the phone, dialed my voice mail number, it answered, I put in my passcode. (It said that I did not have any new voice mails), then hung up! That's it! Message Indicator light off!!! Repeat for each line that shows a (false) message waiting. ~~~Don't forget to move your phone line back into it's correct port on the back of your phone.~~~
9/2/2015 6:37:33 PM •
RCA 25414RE3...
•
Answered
on Sep 02, 2015
•
784 views
Rca tech support: message light blinking
You apparently have unheard messages on the voicemail system provided by your telephone company. This system records messages when someone calls while you're already on the phone. Please contact your telephone company for instructions on accessing their voicemail system.
8/15/2014 2:41:25 PM •
RCA 25414RE3...
•
Answered
on Aug 15, 2014
•
311 views
New Message Light won't stop flashing
Don't know about other models, but I just called RCA small business
phone support (800-511-3180) to find out how to clear the message light
indicator on my 25210 2-line cordless phone when it continues to blink
but there is no message.
All you have to do is hold down the delete button for a few seconds and
it will clear. Hope this helps someone else from going batty!
12/22/2012 1:17:13 AM •
RCA 25414RE3...
•
Answered
on Dec 22, 2012
•
5,504 views
Message Indictator
hi
its hard to understand...
the phone is connected to line 4 or not?
if so and line 4 is dedicated to fax line
then the fax tone is the cause of your confusion
fax tone is different from a regular tone phone
if the phone isnt connected to line 4 and only to all 3 ordinary lines - then the phone is getting a over volage from them
and activates the light & messege alert
my advice
let it be
you will start playing with it something else will go worng...
good day
11/15/2012 2:36:22 AM •
RCA 25414RE3...
•
Answered
on Nov 15, 2012
•
482 views
Line 1 and two not splitting
You can find the combiner at Radio Shack Model: T07843 ' Catalog #: 55034722. It may only be online not in the stores.
11/15/2012 2:57:53 AM •
RCA 25414RE3...
•
Answered
on Nov 15, 2012
•
246 views
Message Indicator Light Continues to Flash
Don't know about other models, but I just called RCA small business phone support (800-511-3180) to find out how to clear the message light indicator on my 25210 2-line cordless phone when it continues to blink but there is no message.
All you have to do is hold down the delete button for a few seconds and it will clear. Hope this helps someone else from going batty!
9/13/2011 4:58:47 PM •
RCA 25414RE3...
•
Answered
on Sep 13, 2011
•
3,056 views
No dail tone
Check the cor and cos setting of the phone It shold have the permissions to call outside
2/28/2018 8:38:16 PM •
RCA 25414RE3...
•
Answered
on Feb 28, 2018
•
894 views
Hi, the ringer on my
How set your phone's ringer Tone!
1. Press the MENU button while in standby mode.
2. Use the button to scroll to SET PHONE OPTIONS.
3. Press the SELECT/SAVE button.
4. Use the button to scroll to SET RING TONE.
5. Press the SELECT/SAVE button. The ringer tone settings for each of the four telephone lines show in the display.
6. Use the button to scroll to through each ringer tone for LINE 1. A sample ringer tone is generated when you scroll to
individual ringer tones. Choose from eight different tones, or turn the ringer OFF.
NOTE: If you select OFF, the cursor automatically moves to the CID ON/OFF option. Use the button to select CID ON or OFF. (ON allows the unit to detect
and display CID records for the corresponding telephone line. OFF disables the function for the corresponding telephone.) Press the SELECT/SAVE button.
7. Press the SELECT/SAVE button to save. The cursor automatically moves to LINE 2.
8. Repeat steps 6 and 7 for each telephone line. After you select the ringer tone for LINE 4, press the EXIT button.
NOTE: The line indicators flash for incoming calls even if the ringer is disabled.
2/8/2011 11:41:38 PM •
RCA 25414RE3...
•
Answered
on Feb 08, 2011
•
279 views
CANT GET INTERCOM TO WORK
Be sure you are pressing the correct extension key for the phone you are attempting to call. Just press 'intercom' and the key number (from the right side of the phone marked 1-16).
6/11/2010 1:12:13 PM •
RCA 25414RE3...
•
Answered
on Jun 11, 2010
•
610 views
RCA 25414 message light... doesn't
I have 6 of these phones. No problem for a year or so, then one phone got the message light stuck on. Tried some online suggestions without success. Powering down etc. failed to fix it so I stuck a piece of tape over the led.
A couple of weeks ago line 2 failed (externally) and ATT sent a tech out who repaired it and also cleaned up the line. When the line came back, all 6 phones had the message light stuck on!
Talked with the tech here and with the ATT support and nothing worked. Eventually the tech here left as it was not a line fault - but he said he would leave the problem open.
That evening a young ATT guy called. He tried a number of different settings and changes - he was really determined! He called Kentucky and Minnesota and part of the advice was "give up and don't call the customer back"!
Finally he found a configuration option in the central office switch (exchange) for the line called CWMI (Call Waiting Message Indicator). Apparently this option was originally active but was changed when the local trunk was upgraded to fibre over the last year or so.
Once he enabled this option (we have call waiting and caller ID on call waiting on this line), the message lights on all the phones turned off and have worked normally since (10 days), including the one that was "broken" for over a year!
I really credit the tech with persistance on the issue.
Hope this helps someone else out there.
Regards, Hugh
5/18/2010 1:17:03 PM •
RCA 25414RE3...
•
Answered
on May 18, 2010
•
1,405 views
Lines 2,3 & 4...caller ID working fine.
Call your phone company as see if they have caller ID on that line. If it works on all of the other lines then the phones seem to be wroking properly so I'd go to the phone company.
5/14/2010 4:54:27 PM •
RCA 25414RE3...
•
Answered
on May 14, 2010
•
124 views
RCA Visys Phone System
We bought this phone for a home business and personal line. We were happy to get rid of the seperate answering machine and thought it was great to have so many features for a reasonable price. About a week later we started to notice a recurring clicking sound that accompanied our conversations, this sound is also heard by the person you are speaking to. I decided to call RCA and see if I had a defective phone... i was informed that this was "normal" for this phone and that there is nothing they can do for me. I plan to return this phone and the additional handsets I bought immediately. Do not buy this phone unless you want to spend your days trying to figure out the morse code clicking that persist through all your calls.
5/5/2010 4:56:15 PM •
RCA 25414RE3...
•
Answered
on May 05, 2010
•
1,343 views
RCA Visys 25204RE1 Message indicator light not working
If it works sometimes, then it might be a problem with the phone or the phone line itself.
If it never works at all, then it's a problem with the services that the phone company has enabled/disabled on the line.
If that's the case, call your phone company's repair line and explain the situation. They can check to confirm that the message waiting indicator service is provisioned on the line, or add it if it's not.
8/4/2009 3:06:25 PM •
RCA 25414RE3...
•
Answered
on Aug 04, 2009
•
1,225 views
The message indicator light will not stop flashing
The term we used for this back when I worked for the phone company was a "stuck message waiting indicator" and the way to fix it was:
Call yourself and leave a message.
Hang up and wait 2 minutes (we used to say 5 minutes, but 2 is plenty)
Retreive/delete your voice mail message
Hang up and wait 2 minutes
That should clear the blinking light.
8/4/2009 3:02:56 PM •
RCA 25414RE3...
•
Answered
on Aug 04, 2009
•
2,198 views
Will not call out!!! 25204RE1
I just encountered this same problem on my phone. To resolve, you must hard reset the phone as follows: unplug power cord, unplug phone cord, remove all batteries. Leave disconnected in this state for at least 10 minutes. Now reconnect in following order: reinstalling batteries, reattach the phone cord followed by plugging in the power cord. This restores the phone to the original settings. You will lose items in memory, but the phone dial function should be restored. This was recommended by customer service and resolved my issue which sounds identical to yours. You can now proceed with resetting up your phone as desired.
2/18/2009 12:33:23 AM •
RCA 25414RE3...
•
Answered
on Feb 18, 2009
•
304 views
Voice mail indicator light is always on
I recently changed my number and when I did, I received the same problem. It appears that AT&T didn't add the Message Indicator Light service to my new number. Once they did, the message light works!
Try calling your phone service provider and asking if they have a Message Indicator Light function.
8/25/2008 6:55:12 PM •
RCA 25414RE3...
•
Answered
on Aug 25, 2008
•
1,149 views
Not finding what you are looking for?