AT&T Siemens S46 GSM Cellular Phone - Answered Questions & Fixed issues
Manual for seimens WM14S890GB
Hello and Welcome to FixYa!
I've attached all the documents that may interest you;
If you have any Confusion, questions or issues regarding your problem do tell me.
Thank you for using FixYa!, Keep visiting..
If you think I was of help, your token of appreciation in the form of rating and a testimonial will be esteemed.
Concerned, Nooh: FixYa Team.
HELP
I have a Siemens
When such things happen it is best to refer a repairman as an improper work could cause a fire and therefore burn the building or even lead to an electric shock which could take lives.
But if you insist on trying it out yourself first check the unit voltage as compared to what is being supplied to you. If the voltages are different then that could be the problem. Next the socket where it is being plugged should be at least 15volts if you plug the unit on a 13 volt this could also cause a fuse blowout. Then also try to replace the blown fuses with a 30 volt fuse instead of 15 although the flipside to this is usually that if there is a power surge then the probability of your electronics getting burnt are high. Also you can just get a stabilizer preferably a 5000 watts which the unit would be plugged to this should help the system a bit.
Hope this solution has been helpful?
feel free to request further assistance if needed.
I have a Gigaset AL
Hi,
You can download and print the instruction manual (English) for Gigaset AL180 in PDF format by clicking this
link.
Adobe PDF Reader is required to view this manual.
Download Adobe ReaderHope this helps. Kindly let me know if you have any difficulty in downloading the manual.
Thanks for using
FixYa.
I have a two year
while unit is off and door opened, Hold the red button down and push the handle up until you hear it
engage. then Grasp the brewing unit 18 by the handle, remove carefully. given the two year period, some considerable force may be neccessary
My gigsate al285 not ringging for resiving the
U can try a cold reboot that where u have the fone turn on
and then u take out the battary while the
fone is turn on it fixed many erorr.
if that dosent work u may have to send it back for a software reset
Not finding what you are looking for?