Top 20 Nokia 5130 Cellular Phone Questions & Answers

Hi to flash you're Nokia to download & install Nokia PC Suite driver ::::: then u will need to download PhoenixSuit tool and then launch it ::::.CHEERS

try a new battery if that does not work it a hardware issue

There might be some battery issue you need to replace this battery to another one and please don't left your mobile while you are charging battery cells going to dead if its over charge and you will going to lose your battery and mobile as well Laptop Rental Laptop Hire in UK Wales Ireland and Scotland Hire Laptops

Check the user guide: http://www.nokia.com/gb-en/support/product-archive/?action=productArchive&tid=1833764

Change battery. If the problem persists, there is something wrong with the charging circuit.

Since you can't restore to factory defaults by normal means, you should perform a Dead USB flash procedure (flashing phone without being on) You'll need the flash files for your mobile phone and Phoenix Service Software. Here is the tutorial: Nokia dead phone USB flashing with Phoenix Service Software

Hi Shubham, Go Phone settings->Phone> Restore factory settings then press ok Phone code 12345 and press ok Thanks

I downloaded 2 File explorer softwares. My phone don't have a Memory card. In C: None of them shows System folder except these two folders. (predefgallery & predefjava).

search youtube there are some videos that might help you on this there is a video that says you can use wifi its not the best of a video

Unfortunately I do not know any way other than to reset your phone. Let me know if you need more help! -Mr. W

Contact your service provider to get what proxy address they are using.

Http://manual.kenwood.com/files/IM366_Ref_K_En_03.pdf Check out page 86 in this PDF to help solve your problem.

if display white and lcd is orignal this mean lcd connection are missing in this case one or more points are missing on mother board .SOME TIME SET IS WATER DAMEGD IN THIS CASE CLEAN AND NORMAL HEAT WITH HOT AIR.HERE YOU ASK ABOUT SOFTWARE PROBLEM,NOW THIS SOLUTION.CHECK SOFTWARE DEVICE CONNECTION POINTS ON PCB IF POINTS ARE ALL OK AND SHOW POLARITY ON CHECK METTER THEN REHOT THE FLASHER IC.CHANGE YOUR DATA CABLE WHO YOU USE TO CONNECT WITH CELL PHONE FROM PC TO DEVICE.OR UP GRADE SOFTWARE OF YOUR SOFTWARE BOX .SOME TIME SET IS OK ALL IS OK BUT USB CABLE DRIVER IS NOT IN YOUR COMPUTER OR LAPTOP.CHECK HARDWARE MANAGER IF USB CABLE IS MARKED WITH QOISTION THEN INSTAL USB DRIVER. IF THESE ARE HELP FULL FOR YOU PLEASE LIKE AND GIVE ME SUPPORT.FOR FURTHER INFORMATION VISIT THIS BLOG PHONETOLLS.BLOGSPOT.COM

You can try 1234 or 0000 to reset your phone.If doesn't work, then visit Unlock-Free.com here they provide master reset code for your Nokia 5130 phone at free of cost.Using this code you can reset your phone and again set a new password.

this link help you How You Know Call Barring Password Nokia 5130

">GO TO WHERE EVER YOU GOT THE NOKIA PHONE FROM AND TELL THEM YOUR PROBLEM BECAUSE I HAD THE SAME PROBLEM AND THE FIXED IT....................

You need to contact the company it is locked with and ask them to unlock it from their system. It'll cost about ten pounds but after a few hours, you will be able to use it on any network.

You need to flash the phone take mobile phone to a service center

samsung s5222 camera failed

If it is sim password,I would suggest you to get an unlock code from Unlocking4free.com for your Nokia 5130 mobile phone.