Sanyo PRO-700 Cellular Phone - Answered Questions & Fixed issues
Imei number
plz press *#06# in your call. It will show the IMEI number for the phone. It is the first 15 numbers.
Where do I plug in the phone charger?
At the right side of the phone, on the bottom, there is a micro-USB socket, where you should plug the phone charger in.By the way, in case you phone's user guide happens to be missing, feel free to downlaod it from
this location.Anyway, please, let me know if you need further help.Regards,Carlos
How to upload from Sanyo Pro 700 to computer
Good morning I would go about it like this. Choose the messages you want to transfer. Make a folder on desktop if you have have not got one already. Connect the phone and the pc with the cable with the usb. When the pc asks you what you want to do with the hardware that is ready to use you push "transfer text" or something to that effect.I hope this will give you the idea.kolbrun
My phone is locked in
Reinsert the headset and when in headset mode access the settings and change the Profile Settings from Silent to General and this should put the device back into its normal mode.
Let me know if this works and if not Email me on
[email protected] and i will sort you out asap. :)
I want to transfer my
Check if both has Bluetooth, or you install a sanyo PC suit on your laptop then the laptop will recognize it.
Need the steps to perform
It is important to know that resetting your phone would wipe out all the data that you hvae on the phone. It is therefore advised that you create a back-up before proceeding.
Steps to Reset Settings
Resetting the default settings restores all the factory defaults,
including the ringer types and display settings.The Contacts, Call
History, Calendar, and Messaging are not affected.
1.Press Menu > Settings > More... > Security.
2.Enter lock code.(The default code is last 4 digits of your phone
number or 0000 or 1234).
3.Select Delete/Reset > Reset All Settings.
4.Read the disclaimer and press OK (left softkey).
5.If you are certain that you would like to restore all the factory
settings, press Yes (left softkey).
Steps to Reset Phone
Resetting the phone resets all settings, including the ringer types
and display settings.This option will delete all data on your phone.
1.Press Menu > Settings > More... > Security.
2.Enter lock code.(The default code is last 4 digits of your phone
number or 0000 or 1234).
3.Select Delete/Reset > Reset Phone.
4.Read the disclaimer and press OK (left softkey).
5.If you are certain that you would like to reset your phone, press Yes (left
softkey).
Hope this was helpful? Please comment for more information and thank you for using FixYa.
How to charge your phone through your desktop or
In order to charge via a Computer you will need the following:
A. USB cord that your phone can plug into, and be plugged into the computer.
B. Install appropriate drivers for your phone. (This is important, the operating system usually wants to know what it is doing with the device prior to providing power to it)
C. The phone must already have a 20% charge or more. (This is a usually set by the phone manufacture since computer usb power is only 3.5 volts and normal charging takes place at 20% or less only when the phone is receiving 3.6 volts or more)
Sprint told me to remove the SIM card from a Sanyo
The Sanyo PRO-700 is like all Sprint phones and uses the CMDA network so no Sim card is used. You can take the phone to the Sprint store and have the clerk's use the transfer machine and that should delete the duplicate entries.
Can I used this phone
Well if you are tied to a particular network all you have to do is to unlock your phone to use it any other GSM network. You can get the unlock code through online. Give your IMEI number & get the unlock code for ur mobile .............You also get through online..........I will suggest the website
Unlock-Zone.com which is doing good service .....you can approach this website.
Hi how do i setup my cell for voicemail
using your cell phone (make sure battery is fully charge) call voice mail and when prompt entered password if you have already set it....and listen to the voice (prompts) it will most likely say you don't have any messages, but do wish to set or change your outgoing message press the appropriate key when prompt and listen to the options to set
I need to do a
www.kyocera-wireless.com/sanyo/.../pro-700.../MTS_PRO-700_User_Guide.pdf
In the manual above, it shows you exactly how to do it..
Thats about all i could find..
The outside lcd screen on
You can try this website for info on a location to get the part or send for repair.
http://cpr-franchise.com/
Cant unlock my sanyo pro 700 cell phone, how do i
What network is it locked to? and what country?
If its locked to ATT/Cingular USA, it can easily be unlocked, I got one of my phone unlocked which was with ATT, now using it with Tmobile!
You find more help on this
here
10/18/2010 6:04:45 PM •
Sanyo PRO-700...
•
Answered
on Oct 18, 2010
•
1,000 views
Not finding what you are looking for?