Top 20 Coleman 10' X 10' Sundome Tent 9160K101 Questions & Answers

My Coleman has the same problem. I can crank the top up but it will not hold in place.

I just leave the crank handle in place after raising the top and secure the handle to the bumper with a bungee cord. It's jury rigged but it works great.

Coleman 10' X... | 2,157 views | 0 helpful votes

sorry but we (fixya) can not help you FIX this contact the MFG or a retailer that sells them

Coleman 10' X... | 190 views | 0 helpful votes

go to the Coleman web page and down load a user manual for that model
or simply talk to a Coleman tech representative to get the info

Coleman 10' X... | 107 views | 0 helpful votes

there is something in the jets or the piping to the mantels, you my find spider webing there, if you did no cap the port where the tank goes some small friends might have wanted to go camping with you.

Coleman 10' X... | 657 views | 0 helpful votes

Tough without pictures but this may be a model that has a spring base the lens is on. Try pushing down. If you post a picture I am sure I can help you out.

Coleman 10' X... | 71 views | 0 helpful votes

The first things to consider when you are buying a tent are size and budget. Figure out how much you have to spend and then try and get the best quality tent you can for that amount.

Coleman 10' X... | 61 views | 0 helpful votes

Try this link;sa=item;in=2985

Coleman 10' X... | 2,395 views | 0 helpful votes

The first things to consider when you are buying a tent are size and budget. Figure out how much you have to spend and then try and get the best quality tent you can for that amount.

Coleman 10' X... | 49 views | 0 helpful votes

Try this link... should work for ya.;sa=item;in=2985

Coleman 10' X... | 950 views | 2 helpful votes

Clean the ground of any rocks, logs or big sticks. Open the stuff sack and pull out all of the contents. Pull the poles out of their pole bag and set them aside. Remove the tent stakes and set them next to the tent.

  • 2 Lay out the tent poles and assemble them. Push the rod blanks together to make the tent poles that will support the mesh tent body.
  • 3 Unroll the mesh tent over the cleared ground. Take care not to step on or walk on the mesh panels. Avoid sticks and snags, as the mesh rips easier than nylon tent fabric.
  • 4 Clip the Timbertop tent pole clips to the poles. There are no tent pole sleeves because Timbertop uses external pole clips for its mesh tents. Criss-cross the tent poles and push the tent pole tips into the metal holes at the end of the pole clip lines. The mesh tent will now be standing upright.
  • 5 Place one tent stake into the ground and through a pole strap stake hole. Pull the tent out as you insert the stake to keep the mesh panels tight. Stake down each pole strap around the perimeter of the tent. Unzip the doors to enter the tent. Zip up the doors quickly after entry to keep bugs and insects out of the tent.
  • Coleman 10' X... | 1,695 views | 5 helpful votes

    Hi well what you need to do is cut a piece of the cable off, and go to a place that stocks and sells nylon cordage, then simply obtain a length that will do the job, then once that's in hand, simply remove all the old cord, and replace with the new one, just reverse whatever you do when you remove the old stuff. It's basically just a bit of rope?

    Coleman 10' X... | 408 views | 0 helpful votes

    Thanks for using fixya...

    Download manual from the below link;sa=album;in=69

    If the camper manual is not listed on the downloads page, please contact Coleman support on this email address:

    [email protected]


    Phone: 1-800-835-3278

    Monday - Thursday CST
    7:00am - 11:30am
    12:30pm - 4:45pm
    Friday CST
    7:00am - 11:30am
    12:30pm - 4:00pm

    Hope it helps..

    Coleman 10' X... | 1,134 views | 0 helpful votes

    On the link below is all the coleman tents. Please look and find your tent for the manual.

    If it is a traler please go to this link to find your manual.;sa=album;in=69

    Coleman 10' X... | 1,703 views | 0 helpful votes

    Usual problems are:-
    No gas from supply cylinder.
    Safety bypass not allowing start up gas flow.
    Piezo lighter not sparking.
    Another possibility, strange as it mat sound, is the burner being blocked by mud-wasps; difficult to believe, easy to rectify.

    Coleman 10' X... | 918 views | 0 helpful votes

    I find this tips about how to Use Coleman Smokers
    1.- Soak the wood chips. The first thing that must be done before you start cooking with smoke at all is the soaking of the wood chips. If you are camping, the best idea is to soak your wood chips before you leave, then pack them in plastic food containers with a small amount of water to keep them moist. Before you pack them, let them soak overnight in a bucket of water.
    2.- Insert the wood chips. Take off the top part of your Coleman smoker. Underneath you will find the area where the propane flame will be. On top of that, there should be a small metal container that either resembles a grill top, or a metal basket with holes (depending on which model you have). Place your wood chips inside this metal holder.
    3.- Ignite the propane fire. After safely connecting the portable propane tank to the Coleman smoker, turn the propane valve on to release the gas. Ignite the propane in your smoker with a match, being sure to extinguish the match in water when you have finished lighting it. Replace the top of the smoker and secure in place before continuing.
    4.- Cook the meat. On top of the smoker, there will be a grill top. Place the meat onto the grill top, making sure there is room for the smoke to get to all the pieces. Put the lid on top of the smoker and let the meat cook for five or six hours. Afterward, be sure to fully extinguish the propane fire, making sure that the gas valve has been shut off completely. Always have a bucket of water handy for emergencies when cooking with gas and an open flame.

    Additional details its possible that find Live Help Chat with a member of our support team; chat hours are listed below:
    Monday: Closed
    Tuesday - Friday: 09:00 AM - 03:00 PM CDT
    Saturday - Sunday: Closed
    It is currently Tuesday, Jul. 05, 2011 07:57 PM CDT

    Hope helps.

    Coleman 10' X... | 609 views | 0 helpful votes


    The only official Coleman repair facility is in Wichita, KS.

    Try oiling the flexible gasket at the end of the pump. More often than not, a leaking pump is is due to the gasket drying out and not forming a proper seal.

    Hope this helps.



    Coleman 10' X... | 160 views | 0 helpful votes

    Your manual can be found at the link below:

    In case of a problem or clarification or my solution was insufficient, don't hesitate to post me a reply.

    If you are satisfied, rate my solution with the "thumbs" or (even better) add a testimonial.

    Coleman 10' X... | 141 views | 0 helpful votes

    Thss may be the manual for your Coleman Screen House:

    Other Coleman manuals are available here:

    Coleman 10' X... | 158 views | 0 helpful votes

    Not finding what you are looking for?
    Coleman 10' X 10' Sundome Tent 9160K101 Logo

    381 questions posted

    Ask a Question

    Usually answered in minutes!

    Top Coleman Sport & Outdoor - Others Experts

    Vernon Taylor

    Level 3 Expert

    6553 Answers

    john h

    Level 3 Expert

    23424 Answers

    Thomas Perkins
    Thomas Perkins

    Level 3 Expert

    14839 Answers

    Are you a Coleman Sport and Outdoor - Other Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    View Most Popular

    Coleman Sport & Outdoor - Others

    • Coleman Sport & Outdoor - Others

    Most Popular Question

    need manual 2000 coleman taos pop up

    • Sport & Outdoor - Others