20 Most Recent Bell Cocoon Child Carrier Questions & Answers

You can get it on amazon :)

I contacted Bell Sports and complained about the lack of downloadable manuals. They said they are in the process of developing the website which will provide them.

http://www.bellbikestuff.com/

It has some basic stuff about helmets and tire changing right now. Stay tuned and check it once in a while.

In the meantime, they sent me the manual for the Doubleback/Tripleback Car Rack in English since that was the one I used as an example.

If you post your email to this solution I will be notified and will send it to you.

A bike shop may have what you need, which I am not really sure what that is.

From User Guide: Interference from a similar unit operating nearby: a) simply remove the batteries from the push button and door chime units and rest for 10 seconds, this will erase memory b) Insert the batteries into the push button and door chime units, the door chime unit will give 2-beeps to indicate that it is ready for the new registration code. Press the Push Button once, it will generate a new operation code randomly and send a wireless ignal to the door chime unit and it will sound to indicate that new operation code is registered and memorised.
(Note with this unit SX85R the door chime is mains powered, not battery powered, but above instructions are the same)

Try following the problem solving from the instructions: http://media.chbyron.eu/file/pdf/SX86_EU-IS_-30-01-09_instructions.pdf

Call the company at 1-800-456-2355 and they can possibly email you a manual.

Open the back of the door chime and the button press.On the back of both of them there is a set of jumpers.From left to right there are 6 available frequencies. You need to grab to jumpers to join 2 of the pins together (top and bottom pin). If you don't have a jumper just use a set of pliers and cross the 2 pins together (top and bottom pins) on a channel you wish to use. Repeat the process for the button press if you've just done the door chime. The 2 pins that you've joined together needs to be the same as you've just done for the door chime.Note the red jumper on the button press, selects the type of door chime you want to hear. this is the 4 right hand side pins on the button press. The far right is a long chime and second in from the far right is a shorter chime.Hope this helps, figured it out by trial and error. :)

would like to how to process cow in steak and other cuts

You can use this manual:
http://www.bellbikestuff.com/pdfs/111741WirelessManual.pdf