20 Most Recent Toshiba DKT-2010H Corded Phone Questions & Answers


intercom, #key, 64,22 then press speaker.

Toshiba... | Answered on Apr 28, 2012


Have a look under the phone to see if there are any switches. Normally the is a 3 possition switch for two types of ring tone and a off possition.

Toshiba... | Answered on Jul 29, 2010


what model phone system do you have. Is it a DK or a CTX system.

Toshiba... | Answered on Feb 22, 2010


By dialing intercom #621 and pressing the * key to move cursor left. press pound changes to letters and 0 is toggle. Your manual and good guides are here
http://guides.idacomusa.com/

Toshiba... | Answered on Feb 11, 2010


intercom #673 to lock
intercom #674 to unlock
to overide the code intercom #674 '0000' (4 times zero)

Toshiba... | Answered on Dec 06, 2009


Sounds like the station is in do not disturb mode.Internal, external and transfered calls do not ring but the station can still make calls. there should be a lit button on the set maybe marked do not disturb or DND. press the button again to turn the led off. hope that helps

Toshiba... | Answered on May 31, 2009


Do you mean send the call to another phone?
Make sure the line is not on hold (push the caller's line) then push Cnf/Trn, dial the extension you want the call to go to, then hang up.
The person you're sending to will receive that call on their speakerphone button and it will ring in a different tone.

Toshiba... | Answered on May 31, 2009


You can get your entire manual here:
http://www.p1bc.com/toshiba/toshiba_dkt_2/DKT2010-H.htm

Toshiba... | Answered on May 13, 2009


this is call waiting setting
must disable it from the program..
or may be some body over ride the call to u
contact the phone proviver to disable the setting

Toshiba... | Answered on Feb 27, 2009


This is a very common problem with the Message waiting light, it can be used to turn on other msg waiting lights on other phones, or used to call back the voicemail after a message has been left in your mailbox. What you need to do is cancel the message waiting light, the code is Intercom + #409, then you will hear a studder dial tone, do that code from both phones (ext 11 and ext 24) and it should solve your problem. I would recommend after using the code, follow up with leaving a message in each phones mailbox to turn the light back on and see if then when you press it, it will take you to your mailbox.

I hope this helps, post back if not.

Toshiba... | Answered on Feb 26, 2009


which system?
The most popular is the DK system but it came in several revisions.
The primary differences are the way the ports are numbered and several program numbers.
Programming is done from port 005(ext 205).
The sequence of events is:
enter programming mode by pressing "speaker *#*#1*2*3"
enter ringing program
Day ring is "spkr 81 hold"
enter port number of the port you want to ring (example : 007#)
press buttons corresponding to the lines you want to ring then press hold.
To exit programming press"spkr ## hold then spkr ## hold.

Toshiba... | Answered on Oct 24, 2008


What does it say whe you push the message light?

Toshiba... | Answered on Oct 11, 2008


intercom # key 409 then press speaker.

Toshiba... | Answered on Oct 11, 2008


please repost if you still need help.

Toshiba... | Answered on Jul 31, 2008


Hi Daren,
I hope by now someone has helped you, if not please repost and I can help. ....Mike

Toshiba... | Answered on Jul 31, 2008

Not finding what you are looking for?
Toshiba DKT-2010H Corded Phone Logo

Popular Tags

35 questions posted

Ask a Question

Usually answered in minutes!

Top Toshiba Lands Phones Experts

martin hogg

Level 2 Expert

157 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Cindy Wells

Level 3 Expert

6136 Answers

Are you a Toshiba Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Toshiba Lands Phones

  • Toshiba Lands Phones

Most Popular Question

cancel camp feature

  • Lands Phones
Loading...