Dremel Stylus Rotary Tool - Answered Questions & Fixed issues
Useing a dremel stylus
I would call Dremel tech service at 1-800-437-3635 and ask them and also get a copy of an instruction manual for future use.
Only runs for 3-5 seconds
THIS SEEMS TO BE A MAJOR PROBLEM FOR DREMEL AND I AM SORRY BUT I HAVENT A SOLUTION (NEITHER HAS DREMEL). I AM A DOMICILLARY CHIROPODIST AND FOUND THIS ITEM ABSOLUTELY FANTASTIC FOR MY WORK...ORIGINALLY I RETURNED MY FIRST ONE WITH A COMPLAINT AND IT WAS REPLACED WITHOUT QUASTION ..HOWEVER IT HAS HAPPENED AGAIN AND MY ONLY SOLUTION IS TO ALWAYS CARRY TWO FOR BACKUP..WHEN I RECHARGE AT NIGHT THOUGH IT ONLY PARTIALLY RECHARGES BEFORE CUTTING OFF LOOKS LIKE I SHALL HAVE TO CARRY THREE......
My Dremel tool has intermittent power.
You can go to any repair facility and buy a replacement cord making sure of the wire guage and conductor (2 or 3) what you can do is make a wiring diagram and remove the old cord and holding the cord about 10 inches from end pull one wire at a time and if there is a break it will pull out to confirm your suspicion. Let me know if you need any more help and if I have answered your request would you please rate this response accordingly and thank you.
My dremel stylus wont turn of and I dont know what
its probably broken, but you could just add a foot operated switch from a hardware store which costs about 4$, which is cheaper than replacing the switch and easier to turn off and on while using the tool.
Looking for the service manual for a weller mini shop model 601 Dremel tool
I'm sorry, but I don't have access to specific service manuals for individual tools. However, here are some steps you can follow to find a service manual for your Weller Mini Shop Model 601 Dremel tool:
- Visit the Weller website: The Weller website may have a library of manuals for its products, including the Mini Shop Model 601.
- Check the manufacturer's support page: Most manufacturers have a support page on their website where you can find user manuals, FAQs, and other resources.
- Search online: You can also try searching online for a digital copy of the manual. Websites like ManualsLib and ManualsOnline may have the manual you need.
- Contact the manufacturer: If you're unable to find the manual online, you can contact the manufacturer directly and request a copy. You may need to provide your tool's model number and other information.
I hope this helps you find the service manual for your Weller Mini Shop Model 601 Dremel tool.
My Dremel nut is stuck can't get off looks like it is stripped
If the threads on the nut or shaft are stripped, the nut will turn freely and it can be removed with pliers by turning and pulling at the same time. If it won't turn, it is probably galled or cross-threaded. In that case, try penetrating oil first. If that doesn't loosen it, try heating the nut with a butane or mapp gas torch. Good luck.
Not finding what you are looking for?