20 Most Recent Stanley TR250 H Heavy Duty Heavy Duty Staple/Nail Gun w/ Free Staples Questions & Answers


I’m trying to buy brads, where can I buy the brads for this staple/Brad gun?

Stanley TR250 H... | Answered on Sep 24, 2017


I bought one of these guns today and I had the same problem and it took me about 2 hours to figure it out as the instructions were very poor. Here how to load the brad nails:-

(a) Pull the slider bar all the way out
(b) Place the brad nail stick on the left side, IN FRONT OF the slider, NOT in the narrow gap in front of the two arrows where it says "LOAD BRADS"
(c) The nail heads should be facing the handle of the gun
(d) Close the slider and lock it
(e) Try it out. I tried nailing hardboard onto chipboard. The lever at low power only put the nail in about 30%. On Hi power it went in about 80%.

Good Luck
Peter

Stanley TR250 H... | Answered on Mar 10, 2017


The magazine on the TR250 has a recess on one side as well as a relief at the top where the driver pushes them through the opening. Load the brads/nails on that side of the magazine and it should operate properly. AS A REMINDER: ALWAYS REMOVE NAILS/STAPLES/BRADS WHEN NOT IN USE AS THIS WILL WEAKEN THE SPRING AND CAUSE FEED PROBLEMS IN THE FUTURE.

Stanley TR250 H... | Answered on Mar 10, 2017


My T50 would fire ONE 1/4" staple correctly and then jam, eating 3 or 4 and after digging those out do it all again. This was one staple eating machine!!.. I disassembled the thing, making some mechanical adjustments which allow only enough room for smooth feeding of ONE staple at a time and now it NEVER misfires or jams. These adjustments will take careful thought and filing of the end of the staple tray nearest the firing pin, along with slight bending of the firing pin to lay flat again the outside head cover. I also filed the outside "tips" of the firing pin to be absolutely flat where it contacts the staple. DO NOT shorten the firing pin if possible. Now I can get even 9/16" staples to go all the way in. :)

Stanley TR250 H... | Answered on Aug 17, 2016


You may download a copy of the manual from here.

Stanley TR250 H... | Answered on Feb 01, 2013


how to reload stapples?

Stanley TR250 H... | Answered on Dec 28, 2012


This is not a type of stapler that clinches the legs of the staples. There would have to be a lower jaw to do that. Like a desk top stapler has.

Stanley TR250 H... | Answered on Dec 27, 2012

Not finding what you are looking for?
Stanley TR250 H Heavy Duty Heavy Duty Staple/Nail Gun w/ Free Staples Logo

45 questions posted

Ask a Question

Usually answered in minutes!

Top Stanley Tools & Hardware - Others Experts

JOHN LAPIER

Level 3 Expert

2601 Answers

Paul Carew

Level 3 Expert

3530 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

210 Answers

Are you a Stanley Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Stanley Tools & Hardware - Others

  • Stanley Tools & Hardware - Others

Most Popular Question

inserting brads into stanley

  • Tools & Hardware - Others
Loading...