20 Most Recent Sunpentown 2,800 Watt 6.5HP Power Generator Questions & Answers

I have parts for 2800 and 3300 Eastern Steel Generators including a Muffler you
can email me if intrested. 12_29_2011_5_46_05_pm.jpg

Sunpentown 2,800... | Answered on Sep 14, 2014

If the unit is starting with no wires to/from the switch, then likely the switch is just supposed to ground the spark in order to stop the engine.

Sunpentown 2,800... | Answered on Jan 22, 2014

If the studs are there to hold it all in place then just buy the correct ( metric probably) nuts for it.

Sunpentown 2,800... | Answered on Dec 15, 2013

There are many generators made in china that use a generic Honda look-a-like motor. If your gen was made in china, good chance that there is an aftermarket starter assembly. Remove the starter and take it to your local small engine repair shop and ask them to try to match it up with another brand. If the starter is missing, take the generator to shop and ask them to look at mounting and starter cup. Good chance there is something out there that will work. If you have the starter assembly, small engine shop may be able to repair. If the starter rewind riveted to fan cover, take the whole fan comer to shop. Good luck

Sunpentown 2,800... | Answered on Sep 12, 2011

Check for a crankcase with oil in it on the motor...if you have oil in the motor already then you do not need to mix it in the gas...
I am very sure that you will find this motor does not need the gas mixed...
Run straight gas... usually it is good to run Prem in small motors..


Sunpentown 2,800... | Answered on May 21, 2011

Try this site: www.shopping.com/sunpentown-tg-2800-generator-parts/products

Sunpentown 2,800... | Answered on Apr 14, 2011

the little spring should go through same holes as the linkage it's purpose is to take the slack out of the rod to keep the engine running smooth a broken spring will cause it too run erratically

Sunpentown 2,800... | Answered on Jan 16, 2011

try replacing the hose anyway ,and put new clamps on it some times you can't see the cramps and sometimes the clamps go bad.

Sunpentown 2,800... | Answered on Dec 21, 2009

you have got a china copy, hard to get bits for.
whats the prob u got with yours

Sunpentown 2,800... | Answered on Sep 19, 2009

I don't know of any 'push rose', on an internal combustion engine. Ah, you mean 'push rods' perhaps, the things that open the valves? The push rod is just a steel rod that works on a cam and presses the rocker, which presses the valve stem tip. Hopefully they just need adjusting, if not, it is a catastrophic failure!


Electrical... | Answered on Jul 12, 2020

top of your electrical panel

Electrical... | Answered on Jul 10, 2020

output depends on what loads you draw on any genset

Electrical... | Answered on Jun 30, 2020

power to starter have never seen one to know if they have a solenoid for it or not

Electrical... | Answered on Jun 29, 2020

Not finding what you are looking for?
Sunpentown 2,800 Watt 6.5HP Power Generator Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Top Sunpentown Electrical Supplies Experts

Gene Haynes

Level 3 Expert

5391 Answers


Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18402 Answers

Are you a Sunpentown Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sunpentown Electrical Supplies

  • Sunpentown Electrical Supplies

Most Popular Question

off switch generator not working

  • Electrical Supplies