20 Most Recent Lexmark C533DN InkJet Printer Questions & Answers


Try downloading Update "Full" Programme. from Lexmark. Lexmark UK DRIVERS & DOWNLOADS. OS Compatibility Lists · Printer Drivers & Software · Lexmark Toolbar V.4 · Publications & User Guides ...
www.lexmark.co.uk/ - Cached - Similar
Markvision All-In-One Inkjet Contact Lexmark Return your Lexmark empty cartridge Lexmark Global Services Lexmark Genesis Colour Laser Printers Lexmark Toolbar V.4

Lexmark C533DN... | Answered on Apr 03, 2019


Here's the link to download the Lexmark X6180 User's Guide. http://www.lexmark.com/publications/pdfs/x6100/eng/ug.pdf . Hope this helps. If you need more assistance, place a comment so I can get back to it. Thanks.

Lexmark C533DN... | Answered on Apr 23, 2015


Please try to check the your drivers settings. The settings set on your driver will always override the printer settings. Please click on the link below, this will show you how to create custom size forms or paper size. http://bitly.com/nVAsX1 If you need further assistance please contact Lexmark Technical Support.

Lexmark C533DN... | Answered on Oct 07, 2011


On the Back of the Printer!!!!!!

Lexmark C533DN... | Answered on Oct 05, 2011


Usually, faxes are temporarily sent to the printer's memory when one of the cartridges' ink level is not substantial for printing. You are advised to replace the cartridge/s, *without navigating away from the message "fax sent to memory", by opening the printer cover and replacing the low-ink cartridge/s. After the new cartridge/s is installed, close the printer cover and press OK button to let printer print the fax stored in the memory.


* Make sure not to navigate away from the "fax sent to memory" message. You will lose the fax-in-memory data once you turn off the printer or navigate away from the message.

Lexmark C533DN... | Answered on Oct 03, 2011


Please visit the Lexmark website to download, for free, the Lexmark Pro900 Series User's Guide.
I hope this information has been helpful.

Lexmark C533DN... | Answered on Oct 03, 2011


It could be that your printer is not getting enough power to turn itself on properly. Try to re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.



If that doesn't help, try to insert your printer into a different known working power outlet in the wall. This will help us identify if it's a faulty power outlet issue.

Lexmark C533DN... | Answered on Oct 03, 2011


Lexmark does not recommend the use of refilled or unauthorized cartridges. These tend to degrade print quality and cartridge/printer performance. I would highly recommend you replace your non-Lexmark cartridges with new genuine ones.

Lexmark C533DN... | Answered on Oct 03, 2011


A quick fix for most communication errors can be achieved by resetting the printer and/or rebooting the PC. Simply disconnect the printer from your computer. Reboot your pc. Unplug and re-plug the printer into the power source to reset it. When the printer turns on, reconnect it to your computer. Then try to print again once the computer fully recognizes the USB connection.


If that doesn't help, try the steps below:

1. Disconnect the printer from your computer.

2. Re-brick your printer. Pull out the power supply, black box where the power cord is plugged in at the back of the printer, and put it back after 30 seconds.

2. On your computer, go to Control Panel > Printers and Faxes.

3. Delete the Lexmark print object.

4. Reboot your pc.

5. When your pc turns on, reconnect the printer.

6. Wait until your pc fully recognizes the USB connection. To check, go to Control Panel > Printers and Faxes. If you see a new Lexmark print object in the list, then try to print a document again to verify that the problem is fixed.


You may also try to update your printer driver by visiting the Lexmark website at http://bit.ly/eVzv1x. Select your operating system, download and execute the file.


If the problem continues, please contact Lexmark Technical Support Center for additional assistance.

Lexmark C533DN... | Answered on Sep 26, 2011


If your printer was connected wireless to your system prior to changing internet provider, you may need to reset your printer's wireless network adapter first and then reconfigure it to reconnect to your new wireless network.
If you need the Lexmark printer driver for your Mac, please visit www.lexmark.com.

Lexmark C533DN... | Answered on Sep 26, 2011


Please remove the cartridges from the printer. Take a dry lint free paper towel and gently wipe the contacts on the back of the cartridge (not the bottom from where ink is present). Wipe the contacts inside the printer (on cartridge carrier). Please snap the cartridges back into the cartridge carrier and please try to print a printer self test.
Good Luck!!!!

Lexmark C533DN... | Answered on Sep 26, 2011


If other print jobs (go through without any problem) from any other applications on your computer, then the problem could be just from your expressit SX3 program. Please contact Lexmark Technical Support Center to further diagnose this problem.

Lexmark C533DN... | Answered on Sep 26, 2011

Not finding what you are looking for?
Lexmark C533DN InkJet Printer Logo

Popular Tags

283 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Cindy Wells

Level 3 Expert

6080 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

C Lexmark

  • C Lexmark

Most Popular Question

lexmark 4850 will not

  • Office Equipment & Supplies
Loading...