Lexmark X2600 InkJet Printer - Answered Questions & Fixed issues

error that the Lexmark Service center is not installed

Lexmark X2600... | Answered on Jul 01, 2016 | 155 views


Cartridges #14 and#15 can be refilled, but they won't work afterward, because they have a "smart chip" that blows the electric contacts on the cartridges (that is why Lexmark labels them as "return program cartridges").
You should buy #14A and #15A, those are refillable.

Hope that helps!

Lexmark X2600... | Answered on Feb 19, 2015 | 452 views

You can launch the brand web site and select the model then download it. Just simple

Lexmark X2600... | Answered on Dec 14, 2014 | 97 views

For error C5 on an X2600 printer it means that you have a defective cartridge and you need to replace it. Please see link for more information: http://support.lexmark.com:80/lexmark/index?page=content&locale=en&productCode=&segment=SUPPORT&clearQuestion=Y&userlocale=EN_US&id=SO4438
Hope this helps.

Lexmark X2600... | Answered on Aug 28, 2014 | 146 views

Leading cause of paper jams is debris / foreign objects that accidentally fell into the paper feed area. Please try this approach to fix the problem:

  1. Remove the sheets of paper from the feeder.
  2. Grab a flashlight and look inside the feeder for any debris or foreign objects.
  3. If you're willing and physically able, you may also carefully turn the printer over. Any debris should just freely roll out from the feeder.
  4. If feeder is clear, place the printer on the table. Open the printer cover and remove the cartridges.
  5. Check the cartridge area for any obstructions in the paper path.
  6. Close the printer cover.
  7. Re-brick your printer by pulling out the power supply - the black box where the power cord is plugged into. Re-plug after 30 seconds.
  8. When the printer turns on, reinsert the cartridges and load some paper. Try to print again to verify that the problem is fixed.

Lexmark X2600... | Answered on Aug 16, 2014 | 67 views

Hello, Check the power cord and make sure it is working and seated in the back of the printer and you have power too the plug. If after you have reseated everything and tryed powering up. If not work then take to local repair shop or call cust. support for the printer.

Lexmark X2600... | Answered on Jun 11, 2014 | 29 views

try cleaning it with rubbing achol

Lexmark X2600... | Answered on Apr 29, 2014 | 23 views

Samsung ml-2570 mono laser printer not work destop print

Lexmark X2600... | Answered on Jan 06, 2014 | 125 views

Clean the contacts

Lexmark X2600... | Answered on Oct 21, 2013 | 28 views

make sure the ink isnt dry. take a tissue and put the inkjet on it. apply slight pressure, lift up and look if there is ink on the tissue. do it a few times. if no ink on tissue it is drry replace. also clean the copper contacts on printer and inkjet

Lexmark X2600... | Answered on Jun 29, 2013 | 89 views

It insists there is a Cartridge problem on the Printer............ In this Case take out the Paper from the Paper Feed Tray........ Unplug the Power Supply from the Printer.......... Remove both the Cartridges from the Printer.......... Now take a size 10 Envelope fold it so that it should become like a thin long strip........ Now Insert that Envelope on the left side corner of the Printer and move it from right to left and left to right as fast as u can for about 10 times.......... Now Insert the Ordinary Papers onto the Printer and insert both the catridges and Turn on the Printer...... Blinking Stopped...........Issue Resolved....... Still Blinking: Remove both the Cartridges take a Paper Towel turn the catridges direction so that u can see a Copper plate with small boxes on it....... Just wipe it twice or thrice with the Paper Towel.......... Now insert it and Power on the Printer and see whether the Lights are still blinking if it is still blinking...... Contact Lexmark at 1-800-539-6275!!!!!

Good Luck!!!!!

Lexmark X2600... | Answered on May 13, 2013 | 128 views

Give it a try by removing the empty color cartridge!!!!!

Lexmark X2600... | Answered on May 13, 2013 | 31 views

I get an E.5.C. message

Lexmark X2600... | Answered on Feb 14, 2013 | 1,849 views

This error code reasons:
Printhead is missing
Try to Install print cartridge(s)

Lexmark X2600... | Answered on Feb 06, 2013 | 159 views

install driver for modem

Lexmark X2600... | Answered on Jan 26, 2013 | 15 views


Lexmark X2600... | Answered on Jan 01, 2013 | 43 views

Try to uninstall the Lexmark driver and download an updated driver online: http://bit.ly/123oqJU

Also, check your security software if it's blocking the printer.

Lexmark X2600... | Answered on Dec 10, 2012 | 211 views

Not finding what you are looking for?
Lexmark X2600 InkJet Printer Logo

714 questions posted

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Cindy Wells

Level 3 Expert

6136 Answers


Level 3 Expert

1363 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides