Brother DCP-7030 Digital All-in-One Laser Printer - Answered Questions & Fixed issues

It sounds like the toner is not fusing to the paper. Could be a fuser problem. May need replacing. DCP 7030 United Kingdom Brother Solutions Center Manual. http://download.brother.com/welcome/doc002338/cv_dcp7030_chneng_usr.pdf Hope this helps, Nik.

that's not a problem, the printer warns you when your toner is soon to end. Get a new cartridge to replace it when it is all used up. Tip: Toner warning comes on early, you can get more pages out by taking the drum out and shaking it carefully.

The Drum must be replaced It cannot be reset. There is a chip inside which configutres the default page counter. regular and high yield drums available http://www.bizrate.com/ink-toner-inkjet-cartridges/brother-dcp-7030-drum/

All electronic equipment with some intelligence in it, can be rewetted, by switching it off, removing the power cable and then connect and switch on again. The machine should start the internal "program" from scratch. In the manual it says you should leave it off for several minutes, if you want to initialise the copier again.

I solved this by http://www.techsupportprinter.com/support-for-brother-printer.html This Company.

OPEN THE FRONT COVER OF YOUR PRINTER AND SELECT YES ON LCD PANEL. ERROR GONE ....ENJOY..

Print Unable EC / BROTHER DCP-7030

What worked for me was to follow the instructions in this video: Resetting lever on cartridge There is a lever on the left hand side of the toner cartridge (left hand side - with you holding the cartridge as if you were going to insert it into the printer). It seems that lever has to be at the '12 o'clock' position to tell the printer that you have a new cartridge. The video showed the person removing 3 screws and then ensuring the lever was at the '12 o'clock' position. On my cartridge I had to do some wiggling to get the lever to move as it's gear assembly seemed to want it to only move down to the '4 o'clock position' and then stay there. Eventually I got it moved to 12 o'clock - and when I stuck the toner back into the printer - the 'toner end of life' message went away. I then removed the toner cartridge - as I wanted to try another cartridge that I had also reset the lever on. I found that lever had again moved to the 3 or 4 o'clock position - after printing just one test page so I am guessing it being at the 12 o'clock position tells the printer you have a new cartridge - and then it moves over to the regular position at 3 or 4 o'clock..

Configuration/scan/Image imaging program should http://imageshack.us/photo/my-images/687/26539234.jpg/

make sure your printer is working well if it still does not print open your printer check your picker if it is working fine you will have to service your printer

http://www.tonerangel.com.au/brother-content.aspx

brother dco 7030 print unable 72 troubleshooting and routine maintenance

Remove the Drum and Reconnect it Restart the printer Please check the connections

Please use good quality toner and then try it, it will best to use genuine cartridges, rather than refiiled ones, because that will save your money for a long run.

can you tell more complete the problem ?

machine tray will be clean .Printer fuser parts clean.plz tell me my cell no. 08273174139 vishal

It seams hat no just that the board is dead..but there are non for sell on the net .so ..for a $200 max printer ..it is not worth to repair..
I think ..if you need something fast ..and to be almost the same as you had..but reliable ..I would go for a HP like one on this page ..(first 3 ones) ..They seam to be also laser printers..like the one you have ..but usually speed and connectivity is to think of ..(they seam to work wireless ..and they are color )
http://www.shopping.hp.com/laser-printer
Canon seam to be a good choice for many ..but it has issues with refilled cartridges..and if you think costs for a page ..I will think twice ..and go for HP ...cause they have a good support ..usually supports well refilled cartridges..(some need reset for the counter ..but work ..)
HP will be my choice for one ..in this range of price ...(under $200)
By the way ..make some research ..after you choose 3 different models in the same range ..and price ...about how much will cost the ink ..and how many copies they make with one load..This way you will see the differences on that too ..
Some are really expensive ..and do not print much ....and you end up to pay it several times in one year, if you buy original cartridges..and use it in office regime ...

When the toner cartridge is exhausted or empty then theprinter will not be able to print further documents or the prints will be veryfaint. You may be able to print a few more pages by removing thetoner cartridge and shaking the toner cartridge in a horizontal position a fewtimes and then placing it back into the printer. This will give you an opportunity to print a few more pages and giveyou time to purchase a new toner cartridge for your printer. A cheaperalternative is to purchase a re-manufactured toner cartridge for your modelprinter. A re-manufactured printer cartridge also replaces worn partsas well as refilling with toner powder.

you ned to change the Drum unit

my pohto compy macine is not work now . Mo. no DCP-7030 , i rfill now toner error message is the clean the corona wire of drom unit a according front cover .