20 Most Recent
Samsung CLX-3175FN Color Laser All-in-One Printer - Page 5 Questions & Answers
Vertical lines when scanning and copying
Had the same problem. Samsung said new machine or circuit board.I had nothing to loose, so I tried cleaning and remelting solder joints.You can Google to findout more and make your oun decesion. I sprayed liquid solder flux on the solder side of the board and put in preheated 450" oven for 25min and took it out to cool. Ihas worked fine ever since. I will try again on other boards if I have a similar problem. I fixed a circuit board on the body control module on my Escalade last weekend. I could see the bad joint on this board with careful examination. I used a solder gun this time because I could see the exact spot and it was a larger solder joint. Hope this helps you. Robert
5/16/2012 3:04:54 PM •
Samsung...
•
Answered
on May 16, 2012
System Error Cycle Power
That error is not listed in the manual, could be a fuser problem, sensor problem, or the main PCB is defective. They have a one year warranty, hope it's still within that period!
3/23/2012 12:01:15 PM •
Samsung...
•
Answered
on Mar 23, 2012
Not finding what you are looking for?