Haier HL32R 32 in. LCD TV - Answered Questions & Fixed issues

0helpful
1answer

Direct tv cannot find a code to program direct TV remote

Hi The following codes should work with your model 12293,13382 ,10178 ,10000 ,11034 Setup Instructions
  1. Turn on the TV manually or using the original TV remote.
  2. Press and hold the "Mute" button and the "Select" button on the direct tv remote at the same time until the green light on the top of the remote blinks twice.
  3. Using the number key, enter the first digit of the code above. Wait for the green light on top of the remote to flash twice
  4. Enter the remaining 4 digits of the code as above.
  5. Aim the remote at your TV and press the "OFF" key once. Your TV should turn off. If it does not turn off, repeat the steps above, trying each code until you find the correct code. www.electro-medical.blogspot.com
9/7/2015 8:57:39 AM • Haier HL32R 32... • Answered on Sep 07, 2015 • 144 views
0helpful
1answer

Haier l32b1120 input source wont go off screen

Software is wrong update software from Haier offical site
2/27/2015 10:54:06 AM • Haier HL32R 32... • Answered on Feb 27, 2015 • 188 views
0helpful
1answer

Haier tv model le32f2220 will not come on has 120v ac to it

Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
2/18/2015 2:55:14 PM • Haier HL32R 32... • Answered on Feb 18, 2015 • 206 views
0helpful
1answer

My remote control for Haier tv stopped working, despite good batteries

Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician.
11/19/2014 12:38:42 PM • Haier HL32R 32... • Answered on Nov 19, 2014 • 4,454 views
0helpful
1answer

The tv will not lock in local channels

Main system control memory IC fault. Contact any service technician to replace it. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
8/6/2014 2:13:07 PM • Haier HL32R 32... • Answered on Aug 06, 2014 • 117 views
0helpful
1answer

What would be the solution if this tv wont turn on?

It seems there is hardware problem so i guess you need to take it to service center for the same, as there is no easy fix for the same.
6/5/2014 12:50:16 PM • Haier HL32R 32... • Answered on Jun 05, 2014 • 190 views
0helpful
1answer

How do I scan when it won't take the number?

You can get the manual at the below mentioned linkHaier HL32R 32 LCD TV Manual
5/26/2014 4:52:14 PM • Haier HL32R 32... • Answered on May 26, 2014 • 94 views
0helpful
1answer

Where can I get a manual for this tV?

You can get the manual at the below mentioned link Haier HL32R 32 LCD TV Manual
5/26/2014 4:26:00 PM • Haier HL32R 32... • Answered on May 26, 2014 • 112 views
0helpful
1answer

How to get channels to stay scanned?

After an auto-tune function, all the received channels should be set in its memory. If not, be sure that the main system control memory IC is damaged and should be replaced. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy. Pull up older posts. Surf the site with patience. Do a search by type in the brand name of your device at its search box. http://electronicshelponline.blogspot.com/
5/26/2014 7:06:46 AM • Haier HL32R 32... • Answered on May 26, 2014 • 132 views
0helpful
1answer

There is no color on tv when cable is connected....there is otherwise when tv is not connected to the cable

A Playstation2? The cable you are using doesn't match the TV input.
3/31/2014 11:12:41 PM • Haier HL32R 32... • Answered on Mar 31, 2014 • 109 views
0helpful
1answer

The tv turns itself off after seconds of the startup can not be turned by REMOTE CONTROL the LED remains alumer

we had that problem and it was the Short protection and the 2.2 ohm resistors that protect the two STK-392-110 convergence chips were open.we fixed it our selves with parts on ebay
10/4/2013 7:26:40 PM • Haier HL32R 32... • Answered on Oct 04, 2013 • 245 views
0helpful
1answer

My tv wont turn show a picture but the blue light is on

The TV might be on protection mode and the TV needs attention by a qualified service technician.
7/14/2012 6:59:16 AM • Haier HL32R 32... • Answered on Jul 14, 2012 • 458 views
0helpful
1answer

I have Compaq d325 Microtower

Hi!

Using the VGA connector is OK. But to get it work, please be sure that the video settings on your computer are adjusted properly:
The resolution of your HL32R is only 1366 x 768. This is the MAX resolution you have to set on your PC. You can also adjust the refresh rate to 60Hz.


Please let me know if it helped.

Good luck!
8/26/2011 12:43:54 PM • Haier HL32R 32... • Answered on Aug 26, 2011 • 69 views
0helpful
1answer

Can remote be used for more than one component?

Hi allan, yes your remote can control six devices (TV, DVD, VCR, SETBOX , CABLE or AUDIO.)

If you tell me the devices you want to program to the haier remote i can give you the codes and tell you how to do it.
2/12/2011 5:37:03 PM • Haier HL32R 32... • Answered on Feb 12, 2011 • 166 views
0helpful
1answer

Need codes for remote

I need to know what kind of remote.
1/21/2011 4:58:18 AM • Haier HL32R 32... • Answered on Jan 21, 2011 • 88 views
0helpful
1answer

Hi.. I have a hl32r-b haier tv and after is on for

I had a similar problem with my 42 in Philips LCD HDTV.



Here was the problem. My Power Supply Board had several bad capacitors. I opened my TV (warranty was expired of course) and found four bulged capacitors. Many electronics companies were sold capacitors that failed in 2-5 years instead of 10-20. The capacitors fail prematurely due to a lack of preservatives. Unfortunately, they were installed in all sorts of devices and cause a wide range of failure problems.


Here are some options for you.



1. Have it fixed by a professional $$$$$$$???????



2. Open your TV and find PSB. Check for faulty caps. If you find some (bulged or leaking) bad caps replace the entire board. The entire board costs around $250 right now because they are in high demand right now. They can be found at tv-part.com but supplies are limited.



3. Remove and then replace individual faulty caps. This takes some soldering skill.

Caps are inexpensive and if you can take care of it yourself it will save you hundreds.



I have a tip/tutorial on this site that may also help. It gives step by step instructions for replacing caps on PSB #715t2432-2. If this is your board you are in luck. It's called: Fixing the Philips Turns/shuts off on its own problem. I'm working on uploading pictures to help guide people though the process as well. Let me know if I can do anything to help.


Hope this helps and Good luck.


Kaufman605

12/13/2010 2:31:52 AM • Haier HL32R 32... • Answered on Dec 13, 2010 • 423 views
0helpful
1answer

My tv is jumping like a stobe light

It may have power supply, T-CON board, main board, or backlight inverter problem. You need to do in-depth troubleshooting.

Basic LCD monitor and LCD TV troubleshooting guide:

http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Failed TV, Monitors, Caps : http://s807.photobucket.com/home/budm/allalbums

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague Capacitor kits: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you. Please post back what you find.

11/15/2010 12:00:48 AM • Haier HL32R 32... • Answered on Nov 15, 2010 • 475 views
0helpful
1answer

Manual for my Haier T.V.

Hi there,

Well you can please follow the below link -

http://www.retrevo.com/support/Haier-HL32R-TVs-manual/id/21395ag202/t/2/

Good Luck!!
3/31/2010 9:35:17 PM • Haier HL32R 32... • Answered on Mar 31, 2010 • 829 views
0helpful
1answer

I need a screen for 32in lcd haier tv

To purchase a new screen would be more than the price of a new TV. Your best bet would be to find the same tv local that has a bad power supply. It would probably be easier to swap the boards from your TV into the new one. You could get a good electrical shock if you don't know your way around high voltage.
2/6/2010 3:37:02 AM • Haier HL32R 32... • Answered on Feb 06, 2010 • 175 views
0helpful
1answer

I have an haier model L32R1 and comcast cable just

i have the same problem and still looking for the code :( but for the mean time i just hook up my digital box to the tv threw the video inputs. hope this helps you.
12/28/2009 9:18:56 PM • Haier HL32R 32... • Answered on Dec 28, 2009 • 371 views
Not finding what you are looking for?
Haier HL32R 32 in. LCD TV Logo

63 questions posted

Ask a Question

Usually answered in minutes!

Top Haier Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76823 Answers

Kolbrun...

Level 3 Expert

1218 Answers

Paul Bade

Level 3 Expert

1688 Answers

Are you a Haier Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...