20 Most Recent Haier HL32R 32 in. LCD TV - Page 2 Questions & Answers

The TV might be on protection mode and the TV needs attention by a qualified service technician.

Hi!

Using the VGA connector is OK. But to get it work, please be sure that the video settings on your computer are adjusted properly:
The resolution of your HL32R is only 1366 x 768. This is the MAX resolution you have to set on your PC. You can also adjust the refresh rate to 60Hz.


Please let me know if it helped.

Good luck!

Hi allan, yes your remote can control six devices (TV, DVD, VCR, SETBOX , CABLE or AUDIO.)

If you tell me the devices you want to program to the haier remote i can give you the codes and tell you how to do it.

I need to know what kind of remote.

I had a similar problem with my 42 in Philips LCD HDTV.

Here was the problem. My Power Supply Board had several bad capacitors. I opened my TV (warranty was expired of course) and found four bulged capacitors. Many electronics companies were sold capacitors that failed in 2-5 years instead of 10-20. The capacitors fail prematurely due to a lack of preservatives. Unfortunately, they were installed in all sorts of devices and cause a wide range of failure problems.

Here are some options for you.

1. Have it fixed by a professional $$$$$$$???????

2. Open your TV and find PSB. Check for faulty caps. If you find some (bulged or leaking) bad caps replace the entire board. The entire board costs around $250 right now because they are in high demand right now. They can be found at tv-part.com but supplies are limited.

3. Remove and then replace individual faulty caps. This takes some soldering skill.

Caps are inexpensive and if you can take care of it yourself it will save you hundreds.

I have a tip/tutorial on this site that may also help. It gives step by step instructions for replacing caps on PSB #715t2432-2. If this is your board you are in luck. It's called: Fixing the Philips Turns/shuts off on its own problem. I'm working on uploading pictures to help guide people though the process as well. Let me know if I can do anything to help.

Hope this helps and Good luck.

Kaufman605

It may have power supply, T-CON board, main board, or backlight inverter problem. You need to do in-depth troubleshooting.

Basic LCD monitor and LCD TV troubleshooting guide:

http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Failed TV, Monitors, Caps : http://s807.photobucket.com/home/budm/allalbums

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague Capacitor kits: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you. Please post back what you find.

Hi there,

Well you can please follow the below link -

http://www.retrevo.com/support/Haier-HL32R-TVs-manual/id/21395ag202/t/2/

Good Luck!!

To purchase a new screen would be more than the price of a new TV. Your best bet would be to find the same tv local that has a bad power supply. It would probably be easier to swap the boards from your TV into the new one. You could get a good electrical shock if you don't know your way around high voltage.

You can download the user manual for your remote here: http://www.comcast.com/corporate/customers/customer_support/remotes.html

i have the same problem and still looking for the code :( but for the mean time i just hook up my digital box to the tv threw the video inputs. hope this helps you.

I have a 32 in. Haier also, i believe channel 3 should do the job but not sure cause i got mine hooked up threw the comcast digital box and hook it up to my tv threw the video inputs. I was told you get better picuter doing this thats why i got mine hooked up this way.

Using the directions to program your remote, try the codes: 016 034 388 718 768 552 523 551 605 526 548 549 550 553 554 555 585 597 626 702 Good luck!

Are you using a cable or satellite box? If so you can connect the audio out jacks to the Surround Sound instead of the TV.

you have to go to your dealer to order a new one//

no no no no you cant..

These are the setup codes for Haier: 0081 0216 0217 0157