20 Most Recent
Questions & Answers
E62.02 message on the screen
i have sony dsc t 300 camera & when i start my camera there is a message on screen E62.02 & then camera auto USB connect mode
Try charging it to see if that helps if its under warranty bring it back or google to to try a factory reset
I want to use self
Touch the self-timer button (the one-handed clock) on the touch panel to cycle through the self-timer modes. Start the self-timer by pressing the shutter release button.
My DSC-T77 screen suddenly goes
Those are the downloaded pictures correct? If so this means that the imaging sensor has gone bad in the camera. Which most likely then means you would want to replace it over repair it as its a fairly expensive repair if there are still parts available to repair it.
You should try some photo recovery software to rescue the files on your camera card, here are some you may rely on. Both programs can also recover videos and music.
Photo Recovery Software (for Windows)
Mac Photo Recovery Software (for Mac OS X)
Be careful: Before your pictures are recovered, do not attempt to save more files to the card in case the original files(your pictures) are overwritten.
Hi, i was wondering if
It's a lens problem - the lens sometimes gets debris in between and does not extend out enough to take clear pictures or the lens is crooked from impact or damage. As for the touch screen and not being able to read the menu on your screen, that's also damage. Don't think factory settings will fix this problem. Did you try troubleshooting on google for your camera - maybe they have some fix it suggestions.
Not finding what you are looking for?