20 Most Recent
Lexmark X2580 Wireless All-in-One InkJet Printer Questions & Answers
1 Answer
Lexmark x2580 cartridge error
Try cleaning the copper strip that runs up the front of the cartridge (not the bottom) use a paper towel and some windex and wipe it off. if that does not work the cartridge may be shot. It does happen randomly or can be causedf by a power surge.
Lexmark X2580...
|
Answered
on Jan 16, 2018
1 Answer
Magenta isn't printing on the
We're sorry to hear that you're having problem with your printer. Lexmark recognizes that some of our inkjet all-in-one customers may be experiencing issues with their print quality. We take our customer user experience very seriously, and we strive to ensure that each time a customer prints using a Lexmark device the page is crisp, clear and up to the highest standards.
However, if your device is displaying a 'printhead error' on the hardware and/or you are suddenly experiencing a print quality issue, please contact the Lexmark Technical Support Center at 1-800-539-6275.
Lexmark agents are prepared and able to help diagnose and resolve your issue. This may involve updating your printer firmware and/or replacing the printhead for your printer, at no charge to you, our customer. Installation is quick and easy for any customer to perform.
Lexmark X2580...
|
Answered
on Jul 12, 2011
1 Answer
ONLY A NARROW IMAGE OF A 'SKETCH-UP' WILL PRINT
Before printing, configure the page setup on the application where you're printing from. Go to File -> Page Setup -> select Landscape orientation -> hit OK to save the setting.
To print your sketch, go to File -> Print -> Preferences/Properties -> from the Page Setup tab, select Landscape orientation -> from the Print Layout tab, select Borderless -> click OK to save the settings -> click OK to start printing.
I hope this information has been helpful.
If you need additional assistance, please contact Lexmark technical support.
Lexmark X2580...
|
Answered
on Nov 25, 2010
1 Answer
Will not print.
First try to clean the gold contact points inside the printer, where the cartridge identification chip comes into the contact with the printer. this is located inside the cartrige slots. If that doesnt work check that the correct colours are being inserted into the correct slots. If you are using un-original cartridges or cartridges that have been refilled they may be incompatible or have been damaged through refilling, you must purchase original lexmark cartridges.
Lexmark X2580...
|
Answered
on Jul 15, 2010
Not finding what you are looking for?
