20 Most Recent Jacuzzi Signa 6 Whirlpool JAC-B540... - Page 8 Questions & Answers


yep they have one

Jacuzzi Home | Answered on Mar 02, 2015


Air Switch Repair
It sounds like you have a bad air switch located in your motor.
The air switch is what the air hose connects to on the back of the motor or on the box on top of the motor.
The other end of the air hose is connected to the air button on the lip of the tub.
This is a latching air switch and when you push the air button it latches and sends the power to the motor.
When the air button is pushed again it opens the latch in the air switch and stops power going to the motor shutting it off.

Jacuzzi Home | Answered on Feb 16, 2015


You have voltage across the element but no heat....

Disconnect one element connection and do a resistance/continuity test. Or use a clamp to measure running current.

Jacuzzi Home | Answered on Feb 13, 2015


here is a sheet with instructions that show how to remove the graphic rings that hold the buttons in place.

Jacuzzi Home | Answered on Feb 09, 2015


Those 3 bars usually indicate the circuit board is not working properly and will need to be replaced.
When you say has 3 bars this is what that shows. - - -

Jacuzzi Home | Answered on Feb 09, 2015


if the air blower will not shut off then it will either be the air switch in the blower or the control module that operates the blower will be bad.

Jacuzzi Home | Answered on Feb 09, 2015


If the bubbles are not working on the tub it could be the check valve is stuck closed or the air blower is not working.

Jacuzzi Home | Answered on Feb 09, 2015


Is this an outdoor hot tub?

If it is an outdoor hot tub...is it heating up or just running all the time?

Jacuzzi Home | Answered on Feb 09, 2015


What kind of parts are you seeking?

Jacuzzi Home | Answered on Feb 09, 2015


Home Deport and Lowes each used to carry a generic front skirt for "jacuzzi" type tubs. You may find something at one of their stores that will work.
The other solution would be to contact a Jacuzzi Showroom for authorized replacement parts.

Jacuzzi Home | Answered on Feb 09, 2015


First thing you need to do is remove some skirting so you can actually see where the water is coming from.
The 3 position control panel would only leak if the water was above it or covering it if it is located in the wall of the tub. That solution would only require the bather to NOT fill the tub quite so full.
IF however the water is coming from another location then that will be noticeable when you are checking for the water leak.

Jacuzzi Home | Answered on Feb 09, 2015


Could be the flapper is not seating correctly. Replacement may be necessary to stop the running.

Jacuzzi Home | Answered on Jan 20, 2015

Not finding what you are looking for?
Jacuzzi Signa 6 Whirlpool  JAC-B540... Logo

Popular Tags

22 questions posted

Ask a Question

Usually answered in minutes!

Top Jacuzzi Home Experts

Mike

Level 3 Expert

4369 Answers

john h

Level 3 Expert

23424 Answers

Bill Johnson

Level 2 Expert

306 Answers

Are you a Jacuzzi Home Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Jacuzzi Home

  • Jacuzzi Home

Most Popular Question

jacuzzi hot tub model j 300 series fl 1

  • Home
Loading...