20 Most Recent GE Marquette Eagle 4000 Vital Signs Patient Monitor with Ecg Nibp SPO2 Questions & Answers

you can visit this web and you can download service manual for eny devices : http://www.frankshospitalworkshop.com/equipment/ecg_service_manuals.html

GE Marquette... | Answered on Nov 22, 2013

i have the same problem, i think you should update the softwere

GE Marquette... | Answered on Nov 21, 2013

There will be an MOV (metal oxide varistor) After fuse. This MOV is rated 125v. When you plug the machine in to 220v supply this MOV will become shorted and its blows the fuse to prevent further dameges to the power supply. Replace the MOV and then insert the fuse. I have added the image of MOV here. It is placed parallel to the AC mains supply rail after fuse.



GE Marquette... | Answered on May 17, 2012

You have to check the battery of you monitor . If the battery is short then this problem can occur.

GE Marquette... | Answered on Sep 24, 2011

remove the AC power. then remove the battery from the machine. reinsall the battery after 15 minutes. then power on. it will be at factory settings. if u need its service manual pls contact me through fixya . for removing battery watch the pictures bellow.


GE Marquette... | Answered on Jan 11, 2011


The eagle 4000 monitor will not work with three leads.

Take care.

GE Marquette... | Answered on Oct 18, 2010

Most likely a bad battery which made the system loose the software. Small chance that the screen is bad. If you connect a pulse ox and you hear the hear rate it is a bad screen. If you don't hear it you will need to get a copy of the software and a new battery. GE does not support these anymore so you should contact a third party if you are not able to do it your self.
If you have further questions you can contact me at [email protected] or through our website www.overstockme.com

GE Marquette... | Answered on Jul 18, 2010

when the battery goes completely dead it looses its software. The only way to fix this is if you have a copy of the original software and install a new battery. With these units it is a good idea not to leave them unplugged for a long period of time. It is a good way to loose all the data.
If you have further questions you can contact me at [email protected] or through our website www.overstockme.com. We have a biomed on staff with 25 years experience who is able to fix this issue.

GE Marquette... | Answered on Jul 18, 2010

we have no way to provide any kind of password assistance, this info must come from the support center for the product.

GE Marquette... | Answered on Jan 20, 2010

I can help with these. I also have user guide and service guide. [email protected]

GE Marquette... | Answered on Sep 14, 2009

I have a user guide to help do this if it is still nessesary.

GE Marquette... | Answered on Jun 03, 2009

After the battery goes dead in these units it earases the internal software. You need to have the software reinstalled with is a rather tricky thing to do.

GE Marquette... | Answered on Jun 03, 2009


GE Medical | Answered on Jul 22, 2020

These usually have a button cell battery to hold the time when its powered off. This backup battery is usually found on the back or underside but may also be inside.

GE Medical | Answered on May 15, 2018

Make sure your print/record speed is 25mm/sec. Most machines have settings of 50mm/sec or 25mm/sec. I bet yours is set to 50mm/sec. RJ

GE Medical | Answered on Sep 28, 2017

If your power line has a two female connection, try unplugging and turning it over ( so the connections are the opposite way around ) plug it back in and try it again, sometimes the current will only flow one way and if it's wrongly connected it will cause the motor to run in reverse.

GE Medical | Answered on Apr 10, 2017

Sorry, but we don't send mails. You can download the manual, on the first hit in Google with your words: service manual ge mac 500.
I can't get the link in here, because as soon as I click it, it starts downloading.

GE Medical | Answered on Feb 09, 2015

Hi ,
I'm sending you the manual...Mail me your id to [email protected]


GE Medical | Answered on Jun 12, 2013

Not finding what you are looking for?
GE Marquette Eagle 4000 Vital Signs Patient Monitor with Ecg Nibp SPO2 Logo

27 questions posted

Ask a Question

Usually answered in minutes!

Top GE Medical Experts


Level 3 Expert

85239 Answers

Brad Brown

Level 3 Expert

18397 Answers


Level 3 Expert

6740 Answers

Are you a GE Medical Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Medical

  • GE Medical

Most Popular Question

eagle 4000 120volts accedentally plug in

  • Medical