20 Most Recent
Schiller Cardiovit At 1 Ecg Machine - Page 2 Questions & Answers
Hi there,
i was taking
hi,
check the battery of your your ecg machine. if the buttery backup is not good this problem can occur.
also try to clean the paper sensor .
ok
1/30/2012 3:34:47 PM •
Schiller...
•
Answered
on Jan 30, 2012
Just ordered a schiller at1 ekg machine, just
hi,
u can make it single channel one by changing its setup. it will print single trace in the same paper. when u select this option it use more paper than the three trace.
ok
4/5/2011 6:53:01 PM •
Schiller...
•
Answered
on Apr 05, 2011
My machine needs the ink changed? how do I do this
There is no ink in that model, it is a thermal printer. You might have the wrong paper or a bad print head or a bad print roller. To test this. Get some thermal paper (You will know it is thermal if you expose it to a heat source and it turns black) and some electrical tape. But a small strip of electrical tape on the print roller. Then do a test sheet. if it prints out darker where you have the electrical tape on the roller it means you need a new roller or possibly a new paper tray cover. You are not getting enough pressure where the two make contact. if you get nothing you need a new print head. We can help with this, 800 989 4909, ask for Jeff
10/26/2009 4:14:59 PM •
Schiller...
•
Answered
on Oct 26, 2009
How do you change schiller ekg from 6 lead to 12 lead?
6 lead / 12 lead EKG. It is unlikely that you can do that with your machine. 6 leads are rarely used and would require a totally different internal format. 12 lead Ekg is the standard of care. Chose 12 lead and dont worry about finding a 6 lead. RJ
Not finding what you are looking for?