20 Most Recent Schlage Electronic Lock FE595 Plymouth or Camelot series - Page 3 Questions & Answers

Any locksmith can do it,BUT- if you go to hardware store you can find locks that have a number on the front of the box that says something like 'TypeA, or Type B' If you purchase the same lock type with the same number or letter, they will all use the same keys included. It's much cheaper than a locksmith.

FIXYA DOESNT HAVE ACCESS TO YOUR PRIVATE CODES OR CODE S FROM ANOTHER COMPANY EITHER CAN NOTIFY A LOCKSMITH OR MANUFACTURER

Take it back and ask the seller of the device.

Contact Schlage customer service on this problem.

I've never seen a lock like that was intended to be that way, but have made that mistake when the shaft that goes through the bolt portion of the deadbolt is square and is 90 degrees off in the square hole it goes through. If so remove two screws on the inside and take out assembly with the key hole, position key hole bottom, then put key side assembly with shaft through bolt portion of lock. Test the key to see if it locks and unlocks, maybe you need to position shaft 90 degrees to left or right to work, then put cover on inside house and the two screws.

It is part of the front part. (Wow, this is hard to explain in words). It is the lock part on the outside of the door, the part with the number buttons.

Hi Winston: Is it possible to try this: - pull the lock from the door while leaving the deadbolt in place - turn the mechanism 180 degrees. - re-install and give it a try. Let me know how you progress.